1. Lay a towel or cloth out on a table or desk. Set the LCD display face-down on the towel or cloth.
2. Find the screws that are located around the perimeter of the bezel. Remove the rubber or plastic caps to expose the screws, if necessary.
3. Remove the screws with the Phillips head screwdriver. Set the screws aside.
4. Pry gently on the bezel to separate it from the frame. Pull the bezel off and set the bezel aside. You will now see two metal brackets that are secured by a screw.
5. Remove the screws from the brackets with the Phillips head screwdriver.
6. Disconnect the ribbon cable for the inverter, which is at the bottom center of the display. Maneuver the connector, if needed, to disconnect the cable.
7. Pull the LCD display out of the back casing of the frame. Set the display aside.
No comments:
Post a Comment