1. Open the paper output tray on the top of the Canon MP600. You should be able to do this easily by putting your finger in the rounded indent on the tray and lifting gently.
2. Raise the printer cover, making sure that the machine is on. The printer head carriage will automatically move to the center of the machine.
3. Pull down to open the inner cover and expose the ink tanks. Be careful not to touch any metallic parts of the machine.
4. Confirm which tank or tanks need replacement; the small LED under an empty tank will be flashing.
5. Remove the empty tank by pressing the tab underneath it and lifting the ink tank up and out of the printer.
6. Prepare and insert the new ink tank. To do this, remove all packaging and pull off the protective orange tape, making sure not to touch electrical contacts with your fingers. Press the front end of the tank into the slot and snap it firmly into place. The red light under the tank should light up. Be sure you replace the same color tank that you removed. The ink tanks should be in this order, from left to right: Black 8, Black 5, Yellow 8, Magenta 8 and Cyan 8.
7. Close the inner cover, the printer cover, and the paper output tray. Wait for the machine to finish its automatic printer head cleaning. After this process has cycled, the ink tanks have been reset and the device should operate normally.
No comments:
Post a Comment