1. Turn the VOX SENS control 360 clockwise. It is located on the front left side of the amplifier in the control panel's middle section.
2. Perform a test page broadcast. Speak in a low tone and at the same time turn the VOX SENS control counterclockwise until you hear the words come over the system without any choppiness or incompleteness in sounds.
3. Turn the VOX SENS control clockwise if you do not hear any background music although a page is not taking place. Stop turning the control when you begin to hear background music.
4. Check the Indicator LED 'PEAK LEVEL' setting if it stays on. It should only flash occasionally at the input signal's loudest peaks. Turn the 'MUSIC VOLUME,' 'MIC VOLUME,' and 'TEL VOLUME' counterclockwise to lower the 'PEAK LEVEL.' These controls are located on the front left side of the amplifier in the control panel's lower section.
No comments:
Post a Comment