1. Identify the printer. If your printer uses memory, you can tell which printer you have by looking at where the cartridge goes in, if you see two 'eyes' and a part of the cartridge goes in between them, follow Step 3. Otherwise, continue with Step 2.
2. Clear the memory by taking the cartridge out and unplugging the unit for 30 seconds. Then, plug it back in and put back in the cartridge. You may need to do this five times, as the memory holds the last five cartridges.
3. If the Brother printer has 'eyes' where the cartridge goes, you will need to block in between them with a piece of tape so that it thinks the cartridge is always full. Simply put a piece of tape on the piece of the cartridge that goes in between the eyes to block the path of the infrared beam.
No comments:
Post a Comment