1.
Fotolia.com'>
Mix until salt has dissolved completely.
Measure and mix 1 gallon white vinegar, 1 cup table salt and 1 tbsp. liquid dish soap together in a large bowl. Stir ingredients with a mixing spoon to completely dissolve the salt. Funnel the mixture into a spray bottle.
2.
Fotolia.com'>
Do not get the vinegar solution on parts of the lawn you wish to keep healthy.
Spray the solution directly on weeds, preferably on a hot day to encourage the drying out of weeds. Do not get solution on nearby grass or soil.
3.
Fotolia.com'>
Use a cloth to wipe down weed leaves.
Wipe down leaves of of weeds with a cloth sprayed with the mixture if you are concerned about solution dripping on parts of your lawn you want to keep green and healthy. Wiping the plant down keeps the solution only on the weeds.
Monday, March 30, 2015
Can't Turn On My Pixma iP4300 (7 Steps)
1. Check the connection on the back of the Canon Pixma iP4300 to make sure the power cable is firmly plugged into the proper port.
2. Plug the power cable into a different electrical outlet and press the 'Power' button to try turning on the printer again.
3. Unplug the power cable from the back of the printer and the electrical outlet and replace it with another one. The Canon Pixma iP4300 will work with any standard two-pronged power cable. Then press the 'Power' button to try turning on the printer again.
4. Hold down the 'Power' button and the 'Resume' button at the same time.
5. Release the 'Resume' button when the printer starts to turn on, press 'Resume' twice quickly and let go of both buttons.
6. Press the 'Resume' button four times in a row when the green status light stops blinking.
7. Hold down the 'Power' button until the printer turns off, wait a few minutes and press the 'Power' button again.
2. Plug the power cable into a different electrical outlet and press the 'Power' button to try turning on the printer again.
3. Unplug the power cable from the back of the printer and the electrical outlet and replace it with another one. The Canon Pixma iP4300 will work with any standard two-pronged power cable. Then press the 'Power' button to try turning on the printer again.
4. Hold down the 'Power' button and the 'Resume' button at the same time.
5. Release the 'Resume' button when the printer starts to turn on, press 'Resume' twice quickly and let go of both buttons.
6. Press the 'Resume' button four times in a row when the green status light stops blinking.
7. Hold down the 'Power' button until the printer turns off, wait a few minutes and press the 'Power' button again.
How to Remove a USB Printer Port
1. Unplug the USB printer from the computer.
2. Click 'Start' and then click the 'Control Panel.'
3. Select 'Printers and Other Hardware.'
4. Select the printer with the USB port that you would like to remove.
5. Click 'Printers' and then select 'Properties.'
6. Go to the 'Ports' tab and then highlight the USB port.
7. Click 'Delete Port' and then click 'Apply' and then 'OK.'
2. Click 'Start' and then click the 'Control Panel.'
3. Select 'Printers and Other Hardware.'
4. Select the printer with the USB port that you would like to remove.
5. Click 'Printers' and then select 'Properties.'
6. Go to the 'Ports' tab and then highlight the USB port.
7. Click 'Delete Port' and then click 'Apply' and then 'OK.'
Instructions for Brother Intellifax 775 (7 Steps)
1. Press the 'Receive Mode' button, located near the right side of the fax machine control panel, to cycle through the fax receive modes. Each time the 'Receive Mode' button is pressed, a new receive mode will appear on the screen.
2. Decide which of the receive options you would like to use. When the fax machine is set to Fax Only mode, the machine will answer every call as if it were a fax. The machine will listen for fax tones when set to Fax/Tel and will only start the fax reception process if fax tones are detected, allowing voice phone calls to be received. TAD: Answer Mach is similar to Fax/Tel, although this mode allows an answering machine to answer calls. When the machine is set to Manual, you must physically press the 'Fax Start' button to receive a fax.
3. Allow the receive mode that you would like to use to remain on the screen for approximately two seconds, after which the LCD screen will return to the normal display, with your selected receive mode displayed on the right side of the screen.
Sending a Fax
1. Place the document that you would like to fax in the automatic document feeder. Insert the pages facedown and upside down, with the top of the page inserted into the fax machine.
2. Move the paper guides around your documents so that they fit securely but do not bend the paper.
3. Enter the fax number to which you would like to send the fax.
4. Press the 'Fax Start' button to send the fax.
2. Decide which of the receive options you would like to use. When the fax machine is set to Fax Only mode, the machine will answer every call as if it were a fax. The machine will listen for fax tones when set to Fax/Tel and will only start the fax reception process if fax tones are detected, allowing voice phone calls to be received. TAD: Answer Mach is similar to Fax/Tel, although this mode allows an answering machine to answer calls. When the machine is set to Manual, you must physically press the 'Fax Start' button to receive a fax.
3. Allow the receive mode that you would like to use to remain on the screen for approximately two seconds, after which the LCD screen will return to the normal display, with your selected receive mode displayed on the right side of the screen.
Sending a Fax
1. Place the document that you would like to fax in the automatic document feeder. Insert the pages facedown and upside down, with the top of the page inserted into the fax machine.
2. Move the paper guides around your documents so that they fit securely but do not bend the paper.
3. Enter the fax number to which you would like to send the fax.
4. Press the 'Fax Start' button to send the fax.
How to Use Warmth for Gout
1. Run a warm bath or use a heated swimming pool or hot tub. Use a water temperature that you can tolerate without discomfort. You don't want to burn yourself. If you are pregnant or have diabetes, high blood pressure or cardiovascular disease, don't sit in a hot bath. If you have any of these conditions, you should use a hot washcloth or heat patch.
2. Soak in the tub for at least 15 minutes. The heat in the bath dilates your blood vessels, helping improve circulation in the area where you are feeling gout pain. The heat also can help make the uric acid crystals more soluble, which will help your body eliminate them quicker. The longer and hotter the bath, the better the heat will be able to penetrate the affected area. Again, be careful not to burn yourself.
3. Repeat the treatment twice a day. You can add two cups of Epsom salts to the bath, which will help enhance the benefits of the heat. Epsom salts contain magnesium, which is thought to help circulation. It also flushes toxins from the body.
4. Take ibuprofen. Ibuprofen acts as an anti-inflammatory. Take two tablets before your bath. As the heat improves your circulation, it will move the medication into the affected area quickly so it can begin to relieve the discomfort.
2. Soak in the tub for at least 15 minutes. The heat in the bath dilates your blood vessels, helping improve circulation in the area where you are feeling gout pain. The heat also can help make the uric acid crystals more soluble, which will help your body eliminate them quicker. The longer and hotter the bath, the better the heat will be able to penetrate the affected area. Again, be careful not to burn yourself.
3. Repeat the treatment twice a day. You can add two cups of Epsom salts to the bath, which will help enhance the benefits of the heat. Epsom salts contain magnesium, which is thought to help circulation. It also flushes toxins from the body.
4. Take ibuprofen. Ibuprofen acts as an anti-inflammatory. Take two tablets before your bath. As the heat improves your circulation, it will move the medication into the affected area quickly so it can begin to relieve the discomfort.
How to Buy a Brother Printer Waste Ink Tank (5 Steps)
1. Know the keywords. For example, Brother's official website is a natural starting point, but you won't find the tank by searching it as such. You'll want to search by 'waste' or 'toner cleaner,' as it is listed as a waste toner cleaner. It looks like a simple plastic container, and you can buy it directly from the site for $16.99.
2. If you've exhausted searching at the 'usual suspects'--your local office-supply retailer--check out Brother Mall. The manufacturer recommends it as a source for all kinds of hard-to-find Brother supplies and accessories. (Follow the link in Resources.)
3. Check and double-check the model number. No matter how or where you buy, ascertain that the tank will work with your specific Brother printer. You don't want to find out until it's too late that the tank isn't right. Hint: Online, the appropriate model is listed under the photo and price. Often, one letter or one number can make a big difference.
4. Familiarize yourself with the return process. Many times, these supplies are non-refundable if opened, making Step 3 all the more important.
5. Try discounted office-supply sites. Note: Not all will have this product. Many specialize in toners and cartridges. A good bet is Quill.com (see Resources), as well as OEM (Original Equipment Manufacturer) sites that are authorized to sell brands like Brother.
2. If you've exhausted searching at the 'usual suspects'--your local office-supply retailer--check out Brother Mall. The manufacturer recommends it as a source for all kinds of hard-to-find Brother supplies and accessories. (Follow the link in Resources.)
3. Check and double-check the model number. No matter how or where you buy, ascertain that the tank will work with your specific Brother printer. You don't want to find out until it's too late that the tank isn't right. Hint: Online, the appropriate model is listed under the photo and price. Often, one letter or one number can make a big difference.
4. Familiarize yourself with the return process. Many times, these supplies are non-refundable if opened, making Step 3 all the more important.
5. Try discounted office-supply sites. Note: Not all will have this product. Many specialize in toners and cartridges. A good bet is Quill.com (see Resources), as well as OEM (Original Equipment Manufacturer) sites that are authorized to sell brands like Brother.
How to Test Fax Lines (4 Steps)
1. Send a fax to another fax machine on a separate fax line in your home or office. Verify that the fax was received. Then send a fax back from the other fax machine. Verify that the second fax was received as well.
2. Send a fax to a friend or family member and ask him whether he received it. Then have him send a fax back to you.
3. Send a fax to Fax Toy (see Resources). Fax Toy has a toll-free number to which you can send a test fax. After the fax is sent, go to their Web site to verify that the fax was received.
4. Send a fax to yourself from a free online fax service, such as FaxZero or MyFax (see Resources). These services will let you send a free fax from their Web site to any fax number.
2. Send a fax to a friend or family member and ask him whether he received it. Then have him send a fax back to you.
3. Send a fax to Fax Toy (see Resources). Fax Toy has a toll-free number to which you can send a test fax. After the fax is sent, go to their Web site to verify that the fax was received.
4. Send a fax to yourself from a free online fax service, such as FaxZero or MyFax (see Resources). These services will let you send a free fax from their Web site to any fax number.
How to Connect a Smartboard to a Wii (3 Steps)
1. Locate the yellow, red and white RVA input jacks on your SMART Board projector. Plug the Wii's A/V cable into the Wii, and plug the three inputs at the opposite end of the cable into the RVA inputs on the projector. Each colored input must be inserted into its corresponding colored input jack on the projector.
2. Plug the Wii's sensor bar into your Wii. Place the sensor bar on the SMART Board's pen tray.
3. Plug your Wii's power adaptor into a power outlet and turn on the Wii. Press the video selector button on your SMART Board or SMART Board remote until the Wii menu appears on the SMART Board screen.
2. Plug the Wii's sensor bar into your Wii. Place the sensor bar on the SMART Board's pen tray.
3. Plug your Wii's power adaptor into a power outlet and turn on the Wii. Press the video selector button on your SMART Board or SMART Board remote until the Wii menu appears on the SMART Board screen.
How to Use Hostname to Add a Printer on a Canon IRC 3380
1. Click the Windows-logo button in the lower-left-hand corner of the screen, and then click 'Control Panel.' Click 'Hardware and Sound,' then click 'Printers.'
2. Click 'Add Printer' at the top of your Explorer window. This opens a configuration wizard window.
3. Select 'Add a network, wireless or Bluetooth printer' and click 'Next.' Enter the location of your printer using the host name. The format to add a printer is '\computer\printer' where 'computer' is the host name and 'printer' is the name of the Canon printer.
4. Click 'Next.' On the final screen, click 'Finish.' The wizard window closes and you are shown a list of printers installed on your computer. Right-click the new Canon printer and select 'Print Test Page' to check your installation.
2. Click 'Add Printer' at the top of your Explorer window. This opens a configuration wizard window.
3. Select 'Add a network, wireless or Bluetooth printer' and click 'Next.' Enter the location of your printer using the host name. The format to add a printer is '\computer\printer' where 'computer' is the host name and 'printer' is the name of the Canon printer.
4. Click 'Next.' On the final screen, click 'Finish.' The wizard window closes and you are shown a list of printers installed on your computer. Right-click the new Canon printer and select 'Print Test Page' to check your installation.
How to Import Access Into FileMaker Pro (8 Steps)
1. Launch Microsoft Access. Click 'File,' then 'Open,' and navigate to the file you want to export. Double-click it to open it in the Access workspace.
2. Click 'File,' then 'Save As.' The 'Save As' dialog window will open. Select '.csv' from the 'Save as type' drop-down list. There are several other file formats that are compatible with FileMaker Pro that the file can be saved as, such as text (.txt) or tab separated (.tab). Select the format you are most comfortable with.
3. Type a name for the Access file in the 'File Name' box, then select a location to save the file. Click the 'Save' button.
Import the Access File into FileMaker Pro
1. Launch the FileMaker Pro application. Click 'File,' then select 'Import Records' from the drop-down list. The Import dialog window will open.
2. Select 'All Files' from the drop-down list in the 'Files of Type' box, then navigate to the saved Access file. Double-click the file name and it will populate the 'File Name' box.
3. Click the 'Open' button, then match the field names from the Access file to the field names of the FileMaker Pro target file. For example, if an Access field has (555) 555-1111, then match it up to the FileMaker target field 'Phone Number.' Click and drag the field entries so they match.
4. Click the 'Scan Data' button to have FileMaker automatically scan and verify the import order to make sure all the fields match.
5. Select 'Add new records,' 'Replace data in current found set' or 'Update matching records in current found set' from the 'Import Action' box. Choose the action that is appropriate for the situation. Click the 'Import' button and the data will be imported into FileMaker Pro.
2. Click 'File,' then 'Save As.' The 'Save As' dialog window will open. Select '.csv' from the 'Save as type' drop-down list. There are several other file formats that are compatible with FileMaker Pro that the file can be saved as, such as text (.txt) or tab separated (.tab). Select the format you are most comfortable with.
3. Type a name for the Access file in the 'File Name' box, then select a location to save the file. Click the 'Save' button.
Import the Access File into FileMaker Pro
1. Launch the FileMaker Pro application. Click 'File,' then select 'Import Records' from the drop-down list. The Import dialog window will open.
2. Select 'All Files' from the drop-down list in the 'Files of Type' box, then navigate to the saved Access file. Double-click the file name and it will populate the 'File Name' box.
3. Click the 'Open' button, then match the field names from the Access file to the field names of the FileMaker Pro target file. For example, if an Access field has (555) 555-1111, then match it up to the FileMaker target field 'Phone Number.' Click and drag the field entries so they match.
4. Click the 'Scan Data' button to have FileMaker automatically scan and verify the import order to make sure all the fields match.
5. Select 'Add new records,' 'Replace data in current found set' or 'Update matching records in current found set' from the 'Import Action' box. Choose the action that is appropriate for the situation. Click the 'Import' button and the data will be imported into FileMaker Pro.
How to Print a Poster Using an HP All in One (19 Steps)
1. Load your HP All-In-One printer with half a pack of photo paper. Hold the paper by its edges to keep any fingerprints off of the paper.
2. Open the file of the photo you want to print, using the program you normally use to print photos from.
3. Click 'File,' then 'Print' from the program's menu bar.
4. Select the 'HP All-In-One' printer, if it is not your default printer. Do not click the mouse -- just highlight the printer.
5. Click 'Properties,' 'Options,' 'Printer Setup,' 'Printer' or 'Preferences' -- depending on the software package you have.
6. Click on the 'Advanced' tab.
7. Select '2x2,' '3x3,' '4x4' or '5x5' under the 'Poster Printing' drop-down list. Note, the '2x2' selection requires four sheets of paper, '3x3' requires nine sheets of paper, '4x4' requires 16 sheets of paper and the '5x5' section requires 25 sheets of paper.
8. Click 'OK.'
9. Click 'Print.' Your photo will start printing.
10. Carefully lay the printed pages out on a flat surface. Wear latex gloves to keep from smearing the ink on the pages.
11. Let the printed pages dry for five minutes.
12. Arrange the printed pages so the poster is formed. Notice which borders need to be trimmed. You don't want to trim all of the borders -- you need to leave one border on the side and one border on the top or bottom of the printed pages to glue the trimmed ones on to.
13. Place a ruler on top of one of the printed pages and trim off the white border that needs to be removed. Use a cutting tool such as a sharp box cutter-like knife or other tool to remove that border. To speed up the trimming process, use a paper cutter.
14. Continue trimming off the white borders that need to be trimmed on each printed page.
15. Apply glue from a glue stick or other adhesive to one of the printed page's untrimmed border.
16. Carefully place the trimmed printed page that matches the other printed page on top of the glue-applied untrimmed border.
17. Gently press the two pages together using a clean soft cloth.
18. Repeat steps 15 through 17 for the next two printed pages you need to glue. Continue gluing and placing until all the pages are connected and the poster is complete.
19. Let the poster dry completely before hanging, laminating or placing it in a frame.
2. Open the file of the photo you want to print, using the program you normally use to print photos from.
3. Click 'File,' then 'Print' from the program's menu bar.
4. Select the 'HP All-In-One' printer, if it is not your default printer. Do not click the mouse -- just highlight the printer.
5. Click 'Properties,' 'Options,' 'Printer Setup,' 'Printer' or 'Preferences' -- depending on the software package you have.
6. Click on the 'Advanced' tab.
7. Select '2x2,' '3x3,' '4x4' or '5x5' under the 'Poster Printing' drop-down list. Note, the '2x2' selection requires four sheets of paper, '3x3' requires nine sheets of paper, '4x4' requires 16 sheets of paper and the '5x5' section requires 25 sheets of paper.
8. Click 'OK.'
9. Click 'Print.' Your photo will start printing.
10. Carefully lay the printed pages out on a flat surface. Wear latex gloves to keep from smearing the ink on the pages.
11. Let the printed pages dry for five minutes.
12. Arrange the printed pages so the poster is formed. Notice which borders need to be trimmed. You don't want to trim all of the borders -- you need to leave one border on the side and one border on the top or bottom of the printed pages to glue the trimmed ones on to.
13. Place a ruler on top of one of the printed pages and trim off the white border that needs to be removed. Use a cutting tool such as a sharp box cutter-like knife or other tool to remove that border. To speed up the trimming process, use a paper cutter.
14. Continue trimming off the white borders that need to be trimmed on each printed page.
15. Apply glue from a glue stick or other adhesive to one of the printed page's untrimmed border.
16. Carefully place the trimmed printed page that matches the other printed page on top of the glue-applied untrimmed border.
17. Gently press the two pages together using a clean soft cloth.
18. Repeat steps 15 through 17 for the next two printed pages you need to glue. Continue gluing and placing until all the pages are connected and the poster is complete.
19. Let the poster dry completely before hanging, laminating or placing it in a frame.
How to Keep Paper From Sticking Together in a Printer
1. Store the paper flat in a dry place. Do not remove the packaging from the paper until you are ready to print on it. This keeps humidity from being absorbed into the paper.
2. Use only high-quality sheets of paper that are not crimped or wrinkled. Paper that is not completely flat may not feed individually through a printer.
3. Fan the paper before inserting it into the printer if you do not normally fan it. If you normally fan it and are experiencing problems, try not fanning it. Fanning in especially dry environments can build up static electricity in the paper.
4. Load only as many sheets of paper as the printer feed tray can hold. There is usually a mark on the paper feed area indicating the maximum fill line. Consult the printer manual for the recommended number of sheets for your printer if you do not see a mark.
5. Clean the rubber printer uptake rollers in the printer periodically. The rollers can pick up paper dust or residue and fail to separate the sheets of paper adequately. If necessary, replace worn rollers. Also check the printer for dust, paper fragments or other debris in the paper path on a regular basis.
6. Use the shortest and flattest printing path through the printer. There is usually a diagram in the printer's manual or on the printer manufacturer's website demonstrating the printing paths through your printer. Use the path least likely to bend the paper.
7. Insert the paper into your printer with the printable side toward the print head. The printable side of the paper is usually indicated by an arrow on the packaging.
2. Use only high-quality sheets of paper that are not crimped or wrinkled. Paper that is not completely flat may not feed individually through a printer.
3. Fan the paper before inserting it into the printer if you do not normally fan it. If you normally fan it and are experiencing problems, try not fanning it. Fanning in especially dry environments can build up static electricity in the paper.
4. Load only as many sheets of paper as the printer feed tray can hold. There is usually a mark on the paper feed area indicating the maximum fill line. Consult the printer manual for the recommended number of sheets for your printer if you do not see a mark.
5. Clean the rubber printer uptake rollers in the printer periodically. The rollers can pick up paper dust or residue and fail to separate the sheets of paper adequately. If necessary, replace worn rollers. Also check the printer for dust, paper fragments or other debris in the paper path on a regular basis.
6. Use the shortest and flattest printing path through the printer. There is usually a diagram in the printer's manual or on the printer manufacturer's website demonstrating the printing paths through your printer. Use the path least likely to bend the paper.
7. Insert the paper into your printer with the printable side toward the print head. The printable side of the paper is usually indicated by an arrow on the packaging.
How to Print Borderless Photos
1.
Fotolia.com' data-modal-content='downloading pictures from camera to laptop image by patrimonio designs from <a href='http://www.fotolia.com'>Fotolia.com</a>'>
Download photos from your camera to your computer.
Download your digital photo to your computer from a digital camera, email or the Internet. Save the photo to your hard drive to a folder that you can find later such as 'Pictures.'
2. Open your digital photo in a photo-viewing software. Click 'Print' from your menu. Go to your printer properties to change your printer's 'Page Setup.' Access 'Properties' through the 'Preferences' or 'Options' link in your 'Print' dialog box. Many software programs have a default margin or border for photos; to print borderless photos, you'll have to remove the default margin.
3. Go to 'Page Layout' and find the 'Borderless Print' option and click the box. Use the drop-down box in 'Size' of paper for older versions of Windows. If you cannot find 'Borderless' in your 'Page Layout' options, your printer does not support borderless printing.
4.
Fotolia.com' data-modal-content='print graffiti image by timur1970 from <a href='http://www.fotolia.com'>Fotolia.com</a>'>
Insert your photo paper into your printer's paper feeder. Make sure the guides are set to keep the paper straight when feeding begins during the print process. Click the 'Print' button.
Fotolia.com' data-modal-content='downloading pictures from camera to laptop image by patrimonio designs from <a href='http://www.fotolia.com'>Fotolia.com</a>'>
Download photos from your camera to your computer.
Download your digital photo to your computer from a digital camera, email or the Internet. Save the photo to your hard drive to a folder that you can find later such as 'Pictures.'
2. Open your digital photo in a photo-viewing software. Click 'Print' from your menu. Go to your printer properties to change your printer's 'Page Setup.' Access 'Properties' through the 'Preferences' or 'Options' link in your 'Print' dialog box. Many software programs have a default margin or border for photos; to print borderless photos, you'll have to remove the default margin.
3. Go to 'Page Layout' and find the 'Borderless Print' option and click the box. Use the drop-down box in 'Size' of paper for older versions of Windows. If you cannot find 'Borderless' in your 'Page Layout' options, your printer does not support borderless printing.
4.
Fotolia.com' data-modal-content='print graffiti image by timur1970 from <a href='http://www.fotolia.com'>Fotolia.com</a>'>
Insert your photo paper into your printer's paper feeder. Make sure the guides are set to keep the paper straight when feeding begins during the print process. Click the 'Print' button.
How to Save Tape on a Brother PT
1. Hold down the 'Code' button and press '@2' once. '@2' has an alternate function of 'Size.' Keep 'Code' pressed to display the current size setting. Keep pressing '@2' until the desired size setting is displayed. The size setting is on the top of the display. For example, if 'Size Auto' is displayed, keeping 'Code' and '@2' pressed will display other sizes; choose a smaller size like 'Size 24,' which will print the text at 24 Point.
2. Change the letter width setting by holding 'Code' down and pressing '@3,' which has an alternative function of 'Width.' The current width setting will be displayed, which will either be 'Wide On' or 'Wide Off.' Keep 'Code' pressed down along with '@3' until 'Wide Off' is displayed. The 'Wide Off' setting will reduce individual letter width and reduce tape use.
3. Reduce the tape margin to save more tape. The default is 'Full,' which leaves a 1-inch margin on each side of the text. Other settings reduce tape and 'None' saves the most tape. Change the setting by holding down 'Code' and pressing 'E' once. 'E' has an alternative function of 'Tape.' Keep them both pressed until 'None' is displayed, then release 'E' and the release 'Code.'
2. Change the letter width setting by holding 'Code' down and pressing '@3,' which has an alternative function of 'Width.' The current width setting will be displayed, which will either be 'Wide On' or 'Wide Off.' Keep 'Code' pressed down along with '@3' until 'Wide Off' is displayed. The 'Wide Off' setting will reduce individual letter width and reduce tape use.
3. Reduce the tape margin to save more tape. The default is 'Full,' which leaves a 1-inch margin on each side of the text. Other settings reduce tape and 'None' saves the most tape. Change the setting by holding down 'Code' and pressing 'E' once. 'E' has an alternative function of 'Tape.' Keep them both pressed until 'None' is displayed, then release 'E' and the release 'Code.'
How to Run a Python Script (6 Steps)
1. Open your Web browser and visit www.python.org/download/releases.
2. Select the latest version of Python from the top of the list, then scroll down to the bottom of the next page and select the Windows x86 installation file.
3. Save the Python installation file to your desktop, then double-click it to open it.
4. Select 'Install for All Users' and then click 'Next' twice.
5. Make sure 'Register Extensions' is selected from the list of install options, then click 'Next' to install Python.
6. Open the folder containing your Python script and double-click the file to automatically run it.
2. Select the latest version of Python from the top of the list, then scroll down to the bottom of the next page and select the Windows x86 installation file.
3. Save the Python installation file to your desktop, then double-click it to open it.
4. Select 'Install for All Users' and then click 'Next' twice.
5. Make sure 'Register Extensions' is selected from the list of install options, then click 'Next' to install Python.
6. Open the folder containing your Python script and double-click the file to automatically run it.
How to Make Your Printer Print Bigger Fonts (5 Steps)
1. Open the document you wish to print, click 'File' and then click 'Print.'
2. Select the printer you want to use in the 'Printer' drop-down menu. For some applications, 'PDF' may be selected by default, which will print your file to a PDF and not to an actual printer.
3. Click the 'Properties' button next to the 'Printer' drop-down menu after you have made your selection.
4. Click the 'Page Options' button and then click 'Format Settings' on the next window.
5. Change the font size in this window. You can also change the font type if you wish. Click 'OK.' Your document should print with the adjusted font size.
2. Select the printer you want to use in the 'Printer' drop-down menu. For some applications, 'PDF' may be selected by default, which will print your file to a PDF and not to an actual printer.
3. Click the 'Properties' button next to the 'Printer' drop-down menu after you have made your selection.
4. Click the 'Page Options' button and then click 'Format Settings' on the next window.
5. Change the font size in this window. You can also change the font type if you wish. Click 'OK.' Your document should print with the adjusted font size.
Sunday, March 29, 2015
How to Recycle Kodak Ink Cartridges (3 Steps)
1. Bring your Kodak ink cartridges to any Best Buy store to recycle. Best buy has a recycling program for people who have items that they want to recycle. It is free to recycle ink cartridges. The cartridges can be dropped off at the kiosks, located just inside the door of every location.
2. Use the Internet as your guide to recycle your Kodak ink cartridges. Visit eCyclegroup.com for details about recycling your ink cartridges. Carefully read the requirements and click on 'Request Recycle Kit.' You will be taken to a screen where you will need to enter your shipping information, which will be used to send a recycle kit.
3. Drop off your Kodak ink cartridges at Office Depot for recycling. There is a recycling program at Office Depot locations for empty ink cartridges. Be sure to call ahead of time to get specific instructions for recycling your Kodak ink cartridges.
2. Use the Internet as your guide to recycle your Kodak ink cartridges. Visit eCyclegroup.com for details about recycling your ink cartridges. Carefully read the requirements and click on 'Request Recycle Kit.' You will be taken to a screen where you will need to enter your shipping information, which will be used to send a recycle kit.
3. Drop off your Kodak ink cartridges at Office Depot for recycling. There is a recycling program at Office Depot locations for empty ink cartridges. Be sure to call ahead of time to get specific instructions for recycling your Kodak ink cartridges.
How to Install Lexmark 5600
1. Close all the open programs on your computer.
2. Insert the installation CD into your computer's disc drive.
3. Wait for the 'Welcome' screen to appear. If it doesn't appear within a few minutes, you'll need to manually start the setup process. On a Mac computer, you can manually start the setup process by double-clicking the 'Install' button. On a Windows Vista PC, you must enter 'D:\ setup.exe' in the search box field in the Start Menu. If you are using Windows XP or earlier, type this same command into the 'Run' field in the Start Menu.
4. Follow the onscreen instructions to complete the installation process. When the installation is complete, you'll be able to print directly from your computer.
Download the Drivers
1. Go to the Lexmark website.
2. Click the 'Support and Downloads' heading and click 'Support and Downloads' again on the following page.
3. Type your printer's model number into the search field. This will bring up all the support information related to your Lexmark printer, including drivers and download information.
4. Click the download link for the driver.
5. Follow the download instructions as they appear on your computer screen. The instructions will guide you through the entire download and installation process. Once complete, your printer will be properly installed and ready to use with your computer.
2. Insert the installation CD into your computer's disc drive.
3. Wait for the 'Welcome' screen to appear. If it doesn't appear within a few minutes, you'll need to manually start the setup process. On a Mac computer, you can manually start the setup process by double-clicking the 'Install' button. On a Windows Vista PC, you must enter 'D:\ setup.exe' in the search box field in the Start Menu. If you are using Windows XP or earlier, type this same command into the 'Run' field in the Start Menu.
4. Follow the onscreen instructions to complete the installation process. When the installation is complete, you'll be able to print directly from your computer.
Download the Drivers
1. Go to the Lexmark website.
2. Click the 'Support and Downloads' heading and click 'Support and Downloads' again on the following page.
3. Type your printer's model number into the search field. This will bring up all the support information related to your Lexmark printer, including drivers and download information.
4. Click the download link for the driver.
5. Follow the download instructions as they appear on your computer screen. The instructions will guide you through the entire download and installation process. Once complete, your printer will be properly installed and ready to use with your computer.
How to Network a Printer to a Wireless Computer
1. Turn on the printer. Connect the printer to the wireless router with an Ethernet cable from the printer to one of the numbered ports on the back of the router. Select any port besides the first port, because that port should be connected to the modem.
2. Open the 'Start' menu on the wireless computer. Click 'Control Panel' in the 'Start' menu. Click 'View devices and printers' under 'Network and Internet' in the Control Panel. Click 'Add a printer' near the top of the next screen.
3. Select the network printer option when the screen asks what type of printer you want to install. Click the printer from the list of available printers on the next screen.
4. Click 'Yes' to install the printer’s device drivers if the computer prompts you to do so. Insert the CD that came with the printer if prompted.
5. Enter the nickname you want to use for the printer, such as '3rd Floor Printer' or 'Mike’s Printer.' Click 'Next.' Select whether you want to set this printer up as your default printer. Click 'Finish.'
2. Open the 'Start' menu on the wireless computer. Click 'Control Panel' in the 'Start' menu. Click 'View devices and printers' under 'Network and Internet' in the Control Panel. Click 'Add a printer' near the top of the next screen.
3. Select the network printer option when the screen asks what type of printer you want to install. Click the printer from the list of available printers on the next screen.
4. Click 'Yes' to install the printer’s device drivers if the computer prompts you to do so. Insert the CD that came with the printer if prompted.
5. Enter the nickname you want to use for the printer, such as '3rd Floor Printer' or 'Mike’s Printer.' Click 'Next.' Select whether you want to set this printer up as your default printer. Click 'Finish.'
How to Change a Modem From the COM1 to COM3 Port
1. Access the Windows 'Start' menu and click the 'Control Panel' link. Click 'System and Maintenance' and choose the 'Device Manager' link. Click 'Continue' if you are using Windows Vista.
2. Click the 'plus sign' icon positioned to the left of the 'Modems' entry in the list of device types. Right-click the name of your computer's modem and choose 'Properties.'
3. Navigate to the tab labeled 'Advanced.' Click the 'Advanced Port Settings' button at the bottom of the window.
4. Click the 'COM Port Number' drop-down menu at the bottom end of the window. Choose the 'COM3' option and click 'OK' to save the change. Restart your computer's operating system.
2. Click the 'plus sign' icon positioned to the left of the 'Modems' entry in the list of device types. Right-click the name of your computer's modem and choose 'Properties.'
3. Navigate to the tab labeled 'Advanced.' Click the 'Advanced Port Settings' button at the bottom of the window.
4. Click the 'COM Port Number' drop-down menu at the bottom end of the window. Choose the 'COM3' option and click 'OK' to save the change. Restart your computer's operating system.
How to Troubleshoot HP Deskjet D2360 Problems
1. Replace the USB cable if you run into problems installing the printer driver on your computer and getting the printer recognized. The cables can deteriorate over time and damage. You can also try disconnecting and reconnecting the existing cable to see if that helps. Connect directly through the cable rather than using a hub. Try removing other physical connections like a scanner. Try disabling the anti-virus software temporarily.
2. Check that the printer and computer are turned on if the printer does not print. Look for paper in the paper tray and replace it if it's missing. The printer cover must be closed and the rear access door must be attached. Clear the print queue if the job became stalled. The print queue is found in the Printer and Faxes area of the 'Start' menu.
3. Remove any paper jams. Take the paper out of the paper tray and turn the printer off. Remove the rear access door by pressing the handle to the right and then pulling out the door. Remove and discard any damaged paper. Reload the paper in the tray and turn the printer on.
4. Verify that the paper is loaded the correct way up if output looks unsatisfactory. Photo paper should have the side to be printed on facing down. Make sure that the paper is firmly seated against the paper guide so that the pick-up can take place, but don't push the paper in so that it curls.
2. Check that the printer and computer are turned on if the printer does not print. Look for paper in the paper tray and replace it if it's missing. The printer cover must be closed and the rear access door must be attached. Clear the print queue if the job became stalled. The print queue is found in the Printer and Faxes area of the 'Start' menu.
3. Remove any paper jams. Take the paper out of the paper tray and turn the printer off. Remove the rear access door by pressing the handle to the right and then pulling out the door. Remove and discard any damaged paper. Reload the paper in the tray and turn the printer on.
4. Verify that the paper is loaded the correct way up if output looks unsatisfactory. Photo paper should have the side to be printed on facing down. Make sure that the paper is firmly seated against the paper guide so that the pick-up can take place, but don't push the paper in so that it curls.
How to Connect My Canon Printer to My Linksys Router
1. Power on the Canon printer and connect it to the Linksys router. Open a web browser on a machine that is connected to the router. Type the IP address of the router into the address bar of the web browser. For a Linksys router, the default is 192.168.1.1. If you have a username and password set, then enter it int the window that appears. The default username for the Linksys router is 'admin' with a blank password.
2. Click the button labeled 'Set up Print Server' in the main configuration screen. This starts the process to configure the router for your Canon printer.
3. Click the 'Next' button until you reach the screen that has a 'Refresh' button on it. Click the 'Refresh' button to obtain an IP address for the Canon printer. Click the 'Next' button.
4. Select the option labeled 'Automatically assign an IP address.' This setting gives the printer an IP address each time it's started. Click the 'Next' button.
5. Enter a user name and password for the Linksys print server settings. This restricts the printer to authorized users. Click the 'Next' button.
6. Enter a user name and password for the router. If you want to keep the existing user name and password, then just click the 'Next' button.
7. Click 'Next' until you get to the 'Test Print' page. Click the button labeled 'Test Print' to send a page to the printer. This ensures that the Canon printer is working on the network.
2. Click the button labeled 'Set up Print Server' in the main configuration screen. This starts the process to configure the router for your Canon printer.
3. Click the 'Next' button until you reach the screen that has a 'Refresh' button on it. Click the 'Refresh' button to obtain an IP address for the Canon printer. Click the 'Next' button.
4. Select the option labeled 'Automatically assign an IP address.' This setting gives the printer an IP address each time it's started. Click the 'Next' button.
5. Enter a user name and password for the Linksys print server settings. This restricts the printer to authorized users. Click the 'Next' button.
6. Enter a user name and password for the router. If you want to keep the existing user name and password, then just click the 'Next' button.
7. Click 'Next' until you get to the 'Test Print' page. Click the button labeled 'Test Print' to send a page to the printer. This ensures that the Canon printer is working on the network.
How to Connect My HP Deskjet Printer to My Dell Computer
1. Insert the installation CD that came with your HP Deskjet printer into the CD drive of your Dell computer. Click “Start” if the CD does not automatically start playing. Click “Computer” on the right side of the Start Menu. Double-click the drive associated with your Dell computer’s CD/DVD player to make the CD start playing.
2. Click “Install” on the first screen of the installation CD. Wait while the CD transfers the required files to your Dell computer. Click “Next” when the process is over. Click “Next” on the Do Not Block HP Install Wizard Processes screen.
3. Select the option to automatically check for updates and click “Next.” Select “Recommended” on the next screen to install all of the software from HP to make the printer work. Select “Custom” for a chance to choose which software you want to install to your Dell computer. Click “Next.”
4. Click “I agree” to accept HP’s licensing agreement. Click “Next” on the screen where HP thanks you for buying their product.
5. Place a check mark in the box next to “Add shortcuts to the Desktop” if you want to see a desktop shortcut to the software. Leave it blank if you would rather not. Click “Next.”
6. Turn on the HP Deskjet printer. Use the USB cable that came with the printer to connect it to your Dell computer’s USB port. Click “Next” when the screen displays “Product connected successfully.”
7. Click “Restart” when the installation wizard prompts you to restart your Dell computer. Click “Finish” when your computer restarts, automatically takes you back to the installation wizard and congratulates you on a successful installation.
2. Click “Install” on the first screen of the installation CD. Wait while the CD transfers the required files to your Dell computer. Click “Next” when the process is over. Click “Next” on the Do Not Block HP Install Wizard Processes screen.
3. Select the option to automatically check for updates and click “Next.” Select “Recommended” on the next screen to install all of the software from HP to make the printer work. Select “Custom” for a chance to choose which software you want to install to your Dell computer. Click “Next.”
4. Click “I agree” to accept HP’s licensing agreement. Click “Next” on the screen where HP thanks you for buying their product.
5. Place a check mark in the box next to “Add shortcuts to the Desktop” if you want to see a desktop shortcut to the software. Leave it blank if you would rather not. Click “Next.”
6. Turn on the HP Deskjet printer. Use the USB cable that came with the printer to connect it to your Dell computer’s USB port. Click “Next” when the screen displays “Product connected successfully.”
7. Click “Restart” when the installation wizard prompts you to restart your Dell computer. Click “Finish” when your computer restarts, automatically takes you back to the installation wizard and congratulates you on a successful installation.
How to Make Laser Printer Toner Last Longer
1. Compare the stated page yields on remanufactured and name brand toner. While third party and remanufactured toner is generally cheaper, the name brand cartridges could be a better value if they yield more pages.
2. Clean the area underneath the toner cartridge on a regular basis. Once a week, remove the toner cartridge and set it aside, then use a soft cloth or a small vacuum to clean the area where the cartridge sat. This will remove any paper dust and toner residue that could foul the paper path and cause you to waste paper and toner.
3. Use the print preview function before sending your documents to the printer. Sometimes the document does not look like you expected it to and if you print the document you waste that paper and the toner. Click on the 'File' menu and choose 'Print Preview' to see the document exactly as it will appear on the page. This gives you a chance to make any needed changes and avoid wasted effort.
4. Print in draft mode whenever possible to save on toner costs. To print in draft mode, click the 'File' menu and choose 'Print,' then click the 'Properties' button. Change the DPI setting to a lower value by clicking on the 'Print Quality' box.
5. Remove the toner cartridge from the printer and shake it vigourously, both up and down and from side to side. Shake the cartridge when you see the print beginning to get lighter. This will move the remaining toner powder around and help it last longer. Depending on your printer model and printing volume, you can get anywhere from an extra day to an extra week of printing by shaking down the cartridge.
6. Use the duplex feature of your printer if it is available. Duplexing prints on both the front and back of each page, helping you save both ink and paper.
2. Clean the area underneath the toner cartridge on a regular basis. Once a week, remove the toner cartridge and set it aside, then use a soft cloth or a small vacuum to clean the area where the cartridge sat. This will remove any paper dust and toner residue that could foul the paper path and cause you to waste paper and toner.
3. Use the print preview function before sending your documents to the printer. Sometimes the document does not look like you expected it to and if you print the document you waste that paper and the toner. Click on the 'File' menu and choose 'Print Preview' to see the document exactly as it will appear on the page. This gives you a chance to make any needed changes and avoid wasted effort.
4. Print in draft mode whenever possible to save on toner costs. To print in draft mode, click the 'File' menu and choose 'Print,' then click the 'Properties' button. Change the DPI setting to a lower value by clicking on the 'Print Quality' box.
5. Remove the toner cartridge from the printer and shake it vigourously, both up and down and from side to side. Shake the cartridge when you see the print beginning to get lighter. This will move the remaining toner powder around and help it last longer. Depending on your printer model and printing volume, you can get anywhere from an extra day to an extra week of printing by shaking down the cartridge.
6. Use the duplex feature of your printer if it is available. Duplexing prints on both the front and back of each page, helping you save both ink and paper.
How to Configure a Toshiba Estudio Printer for Network Printing
1. Press the 'User Functions' button on the upper left area of the control panel.
2. Touch the 'Admin' button on the touch-screen.
3. Enter the administrator password on the QWERTY keyboard on the touch-screen, then touch 'Enter.'
4. Touch the 'Network' button on the touch-screen.
5. Press the 'IPv4' button on the touch-screen. Set the appropriate address mode--Dynamic or Static. Enter the IP address, Subnet Mask and Gateway address, if using Static. Touch the 'Enter' button.
6. Touch the 'Apply Now' button on the touch-screen. The machine will display 'Network Initializing' while the network interface card initializes.
7. Press the 'Function Clear' button on the control panel to return to the default display.
2. Touch the 'Admin' button on the touch-screen.
3. Enter the administrator password on the QWERTY keyboard on the touch-screen, then touch 'Enter.'
4. Touch the 'Network' button on the touch-screen.
5. Press the 'IPv4' button on the touch-screen. Set the appropriate address mode--Dynamic or Static. Enter the IP address, Subnet Mask and Gateway address, if using Static. Touch the 'Enter' button.
6. Touch the 'Apply Now' button on the touch-screen. The machine will display 'Network Initializing' while the network interface card initializes.
7. Press the 'Function Clear' button on the control panel to return to the default display.
How to Hook Up a Computer Projector (4 Steps)
1. Most projectors use the same type of interface that a computer monitor does, so you can attach the projector to the VGA input on your laptop or desktop computer. Make sure that both the computer and the projector are turned off when you initially connect them so as to prevent accidental hardware damage or short circuits in case you accidentally start to attach the projector incorrectly.
2. When you have attached the projector to the VGA input on your computer, turn the projector on and let it run for a few minutes. As the projector starts it should display some sort of image or blank screen, despite the computer not being turned on. If there is an image displayed then you can use it to focus the projector if needed.
3. Turn the computer on. In most cases the computer will recognize the projector immediately and use it as a display device. If it does not, you may need to shut down the computer and attach a standard monitor in order to install needed drivers or configure the computer to recognize the projector before reconnecting the projector and trying again.
4. When you are done with the projector, shut down your computer as you normally would. Once the computer has been successfully shut down you may turn off the projector and disconnect it from the computer, reconnecting your monitor so that you can go back to using it.
2. When you have attached the projector to the VGA input on your computer, turn the projector on and let it run for a few minutes. As the projector starts it should display some sort of image or blank screen, despite the computer not being turned on. If there is an image displayed then you can use it to focus the projector if needed.
3. Turn the computer on. In most cases the computer will recognize the projector immediately and use it as a display device. If it does not, you may need to shut down the computer and attach a standard monitor in order to install needed drivers or configure the computer to recognize the projector before reconnecting the projector and trying again.
4. When you are done with the projector, shut down your computer as you normally would. Once the computer has been successfully shut down you may turn off the projector and disconnect it from the computer, reconnecting your monitor so that you can go back to using it.
How to Stop the Test Print for an HP PSC 1500 Printer
1. Ensure the printer has clean paper in it. Turn the printer off, then turn it back on again. Allow the printer to print the alignment test page.
2. Lift the lid on the scanner and align the top edge of the alignment page face down on the lower-right corner of the scanner glass. Close the scanner lid.
3. Press the 'Start' button on the left-hand side of the PSC 1500. The power button light will start blinking to indicate the alignment is in process. When the light stops blinking, the alignment process is complete and you can remove the test page from the scanner glass.
4. Turn the PSC 1500 off and then back on again. The unit should no longer produce test pages when you turn it on or print to it.
2. Lift the lid on the scanner and align the top edge of the alignment page face down on the lower-right corner of the scanner glass. Close the scanner lid.
3. Press the 'Start' button on the left-hand side of the PSC 1500. The power button light will start blinking to indicate the alignment is in process. When the light stops blinking, the alignment process is complete and you can remove the test page from the scanner glass.
4. Turn the PSC 1500 off and then back on again. The unit should no longer produce test pages when you turn it on or print to it.
How to Network HP Laserjet Printers (6 Steps)
1. Connect your HP LaserJet to your wireless router using an Ethernet cable. Verify that the light above the Ethernet port on your printer, if your model has one, is lit green.
2. Click 'Start' on your computer. Click 'Devices and Printers' in the Start Menu. Click 'Add a printer.' Click the second option, which is to add a network printer.
3. Select your HP LaserJet printer from the list of printers that your computer detects nearby. Click 'Refresh' if you do not see it after your computer has finished scanning. Check your Internet connection and your router function if you still do not see the HP LaserJet printer.
4. Give your computer permission to download and install the device drivers from the Internet. Click 'Next' when the computer indicates that it has successfully installed the drivers for your HP LaserJet. Type in the name you want to call your HP LaserJet. Click 'Next.'
5. Select the option to share your LaserJet printer. Enter the name you want to others to know this printer by, keeping in mind that you can keep the same name that you chose in Step 4. Enter a location for the printer, such as 'Third floor' or 'Williams Building.' Click 'Next.'
6. Check the box to indicate that you want to use this printer as the default printer on your computer. Click 'Finish.'
2. Click 'Start' on your computer. Click 'Devices and Printers' in the Start Menu. Click 'Add a printer.' Click the second option, which is to add a network printer.
3. Select your HP LaserJet printer from the list of printers that your computer detects nearby. Click 'Refresh' if you do not see it after your computer has finished scanning. Check your Internet connection and your router function if you still do not see the HP LaserJet printer.
4. Give your computer permission to download and install the device drivers from the Internet. Click 'Next' when the computer indicates that it has successfully installed the drivers for your HP LaserJet. Type in the name you want to call your HP LaserJet. Click 'Next.'
5. Select the option to share your LaserJet printer. Enter the name you want to others to know this printer by, keeping in mind that you can keep the same name that you chose in Step 4. Enter a location for the printer, such as 'Third floor' or 'Williams Building.' Click 'Next.'
6. Check the box to indicate that you want to use this printer as the default printer on your computer. Click 'Finish.'
How to fix problems HP with all in one printer
1. Turn off or unplug the printer. You can also push the button and reset the power, but leave it off for a bit.
2. Insert the installation software CD that came with your HP unit. Make sure it says 'for Microsoft Windows Vista'.
3. Follow the on-screen prompts and now turn on the printer and plug in the USB cable when prompted.
4. If your computer freezes or the installation stalls at any point, it could be time to try something else. Or, restart the computer and reinsert the CD into your computer. Wait for it to load.
5. Go to the website shown below in Resources and download the drivers for your particular make and model of Hewlett-Packard (HP) all-in-one machine for WINDOWS VISTA. Type in the make and/or model number. It is usually found right on the machine.Double-check you click on the correct model and operating system. If you do not this will cause multiple problems for your HP product installation. Installation may take 30-45 minutes. The drivers will be downloaded to your computer and you will have to click on it and follow the prompts to install it completely so it will work.
6. You can also try to install the printer manually by clicking on 'printers' in Windows Vista, turning on the HP all-in-one and having it locate the printer and install itself. Follow the on-screen prompts. You may have to attempt this a few times if none of the other steps work.
7. After successful installation by any one of these methods, go to properties inside of 'printers' selection. Print a test page while you are inside of this box. You can also print a word processing or Internet page. Also check ink levels and cartridge alignment.
2. Insert the installation software CD that came with your HP unit. Make sure it says 'for Microsoft Windows Vista'.
3. Follow the on-screen prompts and now turn on the printer and plug in the USB cable when prompted.
4. If your computer freezes or the installation stalls at any point, it could be time to try something else. Or, restart the computer and reinsert the CD into your computer. Wait for it to load.
5. Go to the website shown below in Resources and download the drivers for your particular make and model of Hewlett-Packard (HP) all-in-one machine for WINDOWS VISTA. Type in the make and/or model number. It is usually found right on the machine.Double-check you click on the correct model and operating system. If you do not this will cause multiple problems for your HP product installation. Installation may take 30-45 minutes. The drivers will be downloaded to your computer and you will have to click on it and follow the prompts to install it completely so it will work.
6. You can also try to install the printer manually by clicking on 'printers' in Windows Vista, turning on the HP all-in-one and having it locate the printer and install itself. Follow the on-screen prompts. You may have to attempt this a few times if none of the other steps work.
7. After successful installation by any one of these methods, go to properties inside of 'printers' selection. Print a test page while you are inside of this box. You can also print a word processing or Internet page. Also check ink levels and cartridge alignment.
How to Recycle Printer Ribbon (8 Steps)
1. Write down the name and model of all of your printers, copy machines and faxes for your own reference.
2. Collect all of your empty ribbon cartridges. Verify that they are plastic. Do not damage them in any way.
3. Contact Northwest Ribbon Recycling, Inc. (a part of Northwest Printing Strategies, Inc.) by phone at 1-800-648-5156 or by sending them an email to info@nwrr.com to get information about how to ship the cartridges or for any additional information you may need.
4. The company will mail you a prepaid label. You will be able to ship your cartridge(s) free of charge. For more information, visit the website (see Resources).
Program Option 2
1. Write down the name and model number of all of your printers, copy machines and faxes for your own reference.
2. Print out a Ribbon Recyclers' return label (or however many you need, several per page) and cut it out using scissors. Fill out the lines under 'From:' with your name and full address. Note that this is only the return label. See Resources for the label.
3. Place the cartridge(s) with the label attached in the mail to (according to Ribbon Recyclers):Ribbon Recyclers at Ribbon Recyclers, Inc.Denver, CO 80014-2223 - USAThey will return the cartridge(s) in 5-10 days so you can reuse it. Only 3% of the total number of cartridges Ribbon Recyclers receive are not recyclable; if this is the case, the cartridge(s) are returned, along with the reason why they cannot be recycled.
4. Call 1-800-477-3465 or email cs@recycleus.com with any questions. See Resources for the web address.
2. Collect all of your empty ribbon cartridges. Verify that they are plastic. Do not damage them in any way.
3. Contact Northwest Ribbon Recycling, Inc. (a part of Northwest Printing Strategies, Inc.) by phone at 1-800-648-5156 or by sending them an email to info@nwrr.com to get information about how to ship the cartridges or for any additional information you may need.
4. The company will mail you a prepaid label. You will be able to ship your cartridge(s) free of charge. For more information, visit the website (see Resources).
Program Option 2
1. Write down the name and model number of all of your printers, copy machines and faxes for your own reference.
2. Print out a Ribbon Recyclers' return label (or however many you need, several per page) and cut it out using scissors. Fill out the lines under 'From:' with your name and full address. Note that this is only the return label. See Resources for the label.
3. Place the cartridge(s) with the label attached in the mail to (according to Ribbon Recyclers):Ribbon Recyclers at Ribbon Recyclers, Inc.Denver, CO 80014-2223 - USAThey will return the cartridge(s) in 5-10 days so you can reuse it. Only 3% of the total number of cartridges Ribbon Recyclers receive are not recyclable; if this is the case, the cartridge(s) are returned, along with the reason why they cannot be recycled.
4. Call 1-800-477-3465 or email cs@recycleus.com with any questions. See Resources for the web address.
How to Reset HP Printer Cartridges (5 Steps)
1. Turn the ink cartridge over so that you see the contacts. Turn the ink cartridge around so that the copper contacts are at the bottom of the cartridge as you look at it.
2. Place tape over the top contact in the second row from the left side of the ink cartridge. It will be the seventh copper contact. Place the ink cartridge in the printer and the printer will run the alignment.
3. Remove the ink cartridge after the alignment is done. Leave the tape on the contact. Place tape over the top contact in the second row from the right side. It is the sixth copper contact. Replace the ink cartridge in the printer and let the printer run the alignment page.
4. Remove the cartridge after the second alignment. Remove both pieces of tape and make sure that you remove all of the adhesive residue.
5. Place the ink cartridge in the printer carriage. The printer will now display a window showing the ink level as full.
2. Place tape over the top contact in the second row from the left side of the ink cartridge. It will be the seventh copper contact. Place the ink cartridge in the printer and the printer will run the alignment.
3. Remove the ink cartridge after the alignment is done. Leave the tape on the contact. Place tape over the top contact in the second row from the right side. It is the sixth copper contact. Replace the ink cartridge in the printer and let the printer run the alignment page.
4. Remove the cartridge after the second alignment. Remove both pieces of tape and make sure that you remove all of the adhesive residue.
5. Place the ink cartridge in the printer carriage. The printer will now display a window showing the ink level as full.
How to use the Add Hardware Wizard from the Windows 7 Control Panel
1. Click the Windows 'Start' button, and select 'Control Panel' from the Start menu.
2. Open the Windows 'Device Manager' from the 'System and Security' menu.
3. Right-click on the computer name at the top of the device tree, then select 'Add Legacy Hardware' from the menu to launch the 'Add Hardware Wizard.'
4. Click the 'Next' button to start the process of installing the new hardware. Click 'Search for and install the hardware automatically', and then click 'Next.' Windows 7 will then start a scan for new hardware, and will try to install the necessary drivers automatically.
5. Click 'Install the hardware that I manually select from a list' if the hardware isn't found automatically. Select the type of hardware from the list, and then click the 'Have Disk...' button. Navigate to the driver file on the computer's hard disk or CD drive, and click 'Open.' Once the driver has finished installing, restart the computer to ensure the new hardware is correctly installed.
2. Open the Windows 'Device Manager' from the 'System and Security' menu.
3. Right-click on the computer name at the top of the device tree, then select 'Add Legacy Hardware' from the menu to launch the 'Add Hardware Wizard.'
4. Click the 'Next' button to start the process of installing the new hardware. Click 'Search for and install the hardware automatically', and then click 'Next.' Windows 7 will then start a scan for new hardware, and will try to install the necessary drivers automatically.
5. Click 'Install the hardware that I manually select from a list' if the hardware isn't found automatically. Select the type of hardware from the list, and then click the 'Have Disk...' button. Navigate to the driver file on the computer's hard disk or CD drive, and click 'Open.' Once the driver has finished installing, restart the computer to ensure the new hardware is correctly installed.
How to Check How Much Ink Is in the Printer (9 Steps)
1. Make sure your USB printer is connected to your computer and powered on.
2. Open the 'Start' menu and click on the 'Printers and Faxes' button.
3. Right-click on the icon of the printer you want to check and choose 'Properties' or 'Printing Preferences.' The name of the option may differ based on the type of printer you have.
4. Go to the 'Maintenance' tab at the top of the pop-up window; your current ink levels will be displayed below.
Mac Instructions
1. Make sure your USB printer is connected to your computer and powered on.
2. Open 'System Preferences' by clicking on the icon in the Dock.
3. Go to the 'Print & Fax' control panel underneath the 'Hardware' heading.
4. Select the printer you want to check from the list on the left and then click on the 'Options & Supplies' button.
5. Go to the 'Supply Levels' tab at the top of the pop-up window to see the printer's current ink levels.
2. Open the 'Start' menu and click on the 'Printers and Faxes' button.
3. Right-click on the icon of the printer you want to check and choose 'Properties' or 'Printing Preferences.' The name of the option may differ based on the type of printer you have.
4. Go to the 'Maintenance' tab at the top of the pop-up window; your current ink levels will be displayed below.
Mac Instructions
1. Make sure your USB printer is connected to your computer and powered on.
2. Open 'System Preferences' by clicking on the icon in the Dock.
3. Go to the 'Print & Fax' control panel underneath the 'Hardware' heading.
4. Select the printer you want to check from the list on the left and then click on the 'Options & Supplies' button.
5. Go to the 'Supply Levels' tab at the top of the pop-up window to see the printer's current ink levels.
Saturday, March 28, 2015
How to Troubleshoot iP4200 Problems (4 Steps)
1. If you are not getting satisfactory print results, check that the color-ink tanks still have ink in them. If not, get replacements. If this doesn't work, proceed to Step 2.
2. If the problem persists, activate the printhead cleaner. Press down the 'Resume/Cancel' button until you see the 'Power' light flash green. Release the button immediately and the printer will clean the printhead. If this does not work, proceed to Step 3.
3. Carry out the 'PrintHead Deep Cleaning' process. Boot up your PC while ensuring your printer is on. On your screen, click 'Start,' followed by 'Control Panel.' Click on 'Printers And Other Hardware' before selecting 'Printers and Faxes.' Select your printer's icon. Go the 'File Menu' and click on 'Properties' or 'Printing Preferences.' Press on the 'Maintenance' tab and select 'Deep Cleaning.'
4. If you wish to deep clean the black ink tank, select the 'Black PGBK.' If cleaning one of the color ink tanks, select 'Color C,M,Y,BK.' If you wish to clean all colors, then select 'All Colors.' Press 'Execute.' Wait as the cleaning operation is carried out; it should take no more than 75 seconds. Ensure that you do not operate the printer during this time.
2. If the problem persists, activate the printhead cleaner. Press down the 'Resume/Cancel' button until you see the 'Power' light flash green. Release the button immediately and the printer will clean the printhead. If this does not work, proceed to Step 3.
3. Carry out the 'PrintHead Deep Cleaning' process. Boot up your PC while ensuring your printer is on. On your screen, click 'Start,' followed by 'Control Panel.' Click on 'Printers And Other Hardware' before selecting 'Printers and Faxes.' Select your printer's icon. Go the 'File Menu' and click on 'Properties' or 'Printing Preferences.' Press on the 'Maintenance' tab and select 'Deep Cleaning.'
4. If you wish to deep clean the black ink tank, select the 'Black PGBK.' If cleaning one of the color ink tanks, select 'Color C,M,Y,BK.' If you wish to clean all colors, then select 'All Colors.' Press 'Execute.' Wait as the cleaning operation is carried out; it should take no more than 75 seconds. Ensure that you do not operate the printer during this time.
How to Change the Ink Cartridge in an HP 4280
1. Turn the printer on and confirm that there is paper in the tray. After the new ink cartridges are loaded, the printer will need to run an alignment test. On the front of the printer, above and to the right of the paper tray, there is an access door that swings open sideways. Open the access door. The ink cartridges will move so that they can be reached through the door.
2. Press both print cartridges down until they pop out of their holders. If you will have difficulty remembering each cartridge's position, remove only one at a time. Once a cartridge is popped out of its holder, it can be lifted freely through the access door.
3. Prepare the new ink cartridges for installation by removing them from the packaging and removing the tape from the bottom of each cartridge. Be careful not to touch the delicate metal contacts on the bottom of the cartridges.
4. Install the cartridges by aligning them slightly below the holders, then pushing them up and forward until they snap into place. Close the access door when you are finished. A test sheet will begin printing to check the alignment of the cartridges.
5. Open the lid of the scanner and place the test page face down on the scanner bed. The upper-left corner of the test page should line up with the arrow in the corner of the scanner bed.
6. Push the 'Scan' button on the printer control panel. The scanner will scan the test page into the printer's memory, which will then be used to make any alignment adjustments that are necessary. The printer is ready to use when the test is complete.
2. Press both print cartridges down until they pop out of their holders. If you will have difficulty remembering each cartridge's position, remove only one at a time. Once a cartridge is popped out of its holder, it can be lifted freely through the access door.
3. Prepare the new ink cartridges for installation by removing them from the packaging and removing the tape from the bottom of each cartridge. Be careful not to touch the delicate metal contacts on the bottom of the cartridges.
4. Install the cartridges by aligning them slightly below the holders, then pushing them up and forward until they snap into place. Close the access door when you are finished. A test sheet will begin printing to check the alignment of the cartridges.
5. Open the lid of the scanner and place the test page face down on the scanner bed. The upper-left corner of the test page should line up with the arrow in the corner of the scanner bed.
6. Push the 'Scan' button on the printer control panel. The scanner will scan the test page into the printer's memory, which will then be used to make any alignment adjustments that are necessary. The printer is ready to use when the test is complete.
How to Use Mica in Fused Glass (8 Steps)
1. Sketch out a design to use in your fused glass art. Be sure to think about the use of both positive and negative space when creating your design.
2.
Cut one 8x8 inch piece of glass. Wash carefully with alcohol. Be sure there is no oil, including from your hands on your glass.
3.
Mix mica and alcohol on glass dish until there are no lumps in the mixture. Scrape into glass jar to be used for painting or spray painting.
4. Draw a pattern onto contact paper. Cut out the design to create a one-use stencil that can be stuck onto your glass. Note that stickers are a nice pre-made alternative to creating a one use stencil with contact paper.
5.
Adhere the stencil to the glass.
6. Evenly paint or spray the glass sheet covered in contact paper with the mica mixture. Let the mica mixture dry.
7. Carefully remove the contact paper. Mica will be left in all the holes left in your stencil.
8. Place in the fused glass piece into the prepared glass kiln. Fire using the following schedule as a guide:Ramp ºF/Hr Target temperature Hold for
1 350 1490 10
2 Full 960 15
3 150 700 0
2.
Cut one 8x8 inch piece of glass. Wash carefully with alcohol. Be sure there is no oil, including from your hands on your glass.
3.
Mix mica and alcohol on glass dish until there are no lumps in the mixture. Scrape into glass jar to be used for painting or spray painting.
4. Draw a pattern onto contact paper. Cut out the design to create a one-use stencil that can be stuck onto your glass. Note that stickers are a nice pre-made alternative to creating a one use stencil with contact paper.
5.
Adhere the stencil to the glass.
6. Evenly paint or spray the glass sheet covered in contact paper with the mica mixture. Let the mica mixture dry.
7. Carefully remove the contact paper. Mica will be left in all the holes left in your stencil.
8. Place in the fused glass piece into the prepared glass kiln. Fire using the following schedule as a guide:Ramp ºF/Hr Target temperature Hold for
1 350 1490 10
2 Full 960 15
3 150 700 0
How to Repair Printer Rollers
1. Turn the printer off and remove the power cord. Slide the paper tray out until it stops, then carefully lift the tray up from the bottom and slide it free of the track. Set the paper tray aside.
2. Reach inside the printer through the paper tray opening and feel along the right-hand side. Find the rollers and note their texture. If the rollers are worn completely smooth, they must be replaced. If the rollers still feel rough, they may be salvaged and reused.
3. Grasp the roller firmly and pull it off the bar. Clean the roller thoroughly with a clean cloth. Over time paper dust and ink residue accumulate on the rollers, and this can interfere with their normal operation.
4. Dampen a cloth using warm water and soak the roller thoroughly if a label is wrapped around it. One of the most common problems with printer rollers occurs when a label comes off inside the printer and wraps around the roller. Wrap the damp cloth around the roller to loosen the adhesive on the label, then attempt to peel the label off the roller. If the label does not come off cleanly, the roller should be replaced.
2. Reach inside the printer through the paper tray opening and feel along the right-hand side. Find the rollers and note their texture. If the rollers are worn completely smooth, they must be replaced. If the rollers still feel rough, they may be salvaged and reused.
3. Grasp the roller firmly and pull it off the bar. Clean the roller thoroughly with a clean cloth. Over time paper dust and ink residue accumulate on the rollers, and this can interfere with their normal operation.
4. Dampen a cloth using warm water and soak the roller thoroughly if a label is wrapped around it. One of the most common problems with printer rollers occurs when a label comes off inside the printer and wraps around the roller. Wrap the damp cloth around the roller to loosen the adhesive on the label, then attempt to peel the label off the roller. If the label does not come off cleanly, the roller should be replaced.
How to Turn Off ECM Mode on a Brother MFC 7840W
1. Press the MFC 7840W's 'Power' button to turn the device on. Wait for the device to fall silent, signaling it has finished its warm up procedures before continuing.
2. Press the 'Menu' button on the device's control panel. Press the '2' then '0' then '1' keys on the numeric keypad on the device's control panel.
3. Use the up and down arrow keys to cycle through the device's Equalization settings. Once the display screen reads 'Basic' stop pressing the arrow keys.
4. Press the 'OK' button on the control panel to save your setting. Press the 'Stop/Exit' button to leave the menu and continue using the device.
2. Press the 'Menu' button on the device's control panel. Press the '2' then '0' then '1' keys on the numeric keypad on the device's control panel.
3. Use the up and down arrow keys to cycle through the device's Equalization settings. Once the display screen reads 'Basic' stop pressing the arrow keys.
4. Press the 'OK' button on the control panel to save your setting. Press the 'Stop/Exit' button to leave the menu and continue using the device.
How to Install a Dell Printer
1. Insert the installation disk that comes with your printer into the CD-ROM drive on your computer. The computer should automatically detect the disk and open the installation window. If the installation window does not automatically open, double-click 'My Computer' on the desktop and right-click the CD-ROM drive with the disk. Click 'Play.'
2. Click 'I accept' after reading the terms and conditions, and select the location to install the printer drivers to.
3. Complete the installation of the drivers and restart your computer. Move to the next step if you do not have an installation disk.
4. Navigate to the printer drivers page (see Resources below) and select the drivers that are needed for your printer. Every driver is listed under the printer it supports. Select your operating system and click 'Download Now.'
5. Click 'Run' to begin the download. When the download is complete, click 'Allow' or 'Run.' Click 'OK' in the 'Select the folder where you want to unzip the files to' window.
6. Click 'Yes to all' when asked if you want to overwrite the folder. Click 'OK' in the 'All files were successfully unzipped' window. Follow the final prompts to install the printer driver and restart your computer.
7. Connect your Dell printer to the computer using the supplied USB cable.
2. Click 'I accept' after reading the terms and conditions, and select the location to install the printer drivers to.
3. Complete the installation of the drivers and restart your computer. Move to the next step if you do not have an installation disk.
4. Navigate to the printer drivers page (see Resources below) and select the drivers that are needed for your printer. Every driver is listed under the printer it supports. Select your operating system and click 'Download Now.'
5. Click 'Run' to begin the download. When the download is complete, click 'Allow' or 'Run.' Click 'OK' in the 'Select the folder where you want to unzip the files to' window.
6. Click 'Yes to all' when asked if you want to overwrite the folder. Click 'OK' in the 'All files were successfully unzipped' window. Follow the final prompts to install the printer driver and restart your computer.
7. Connect your Dell printer to the computer using the supplied USB cable.
I Cannot Connect to My Kodak Printer Wirelessly
1. Check to make certain your computer has a wireless card installed. If your computer does not have an installed wireless device, you can use a 'dongle' in a USB port, but these do not always work properly. Sometimes, shutting down the computer will make it difficult to re-establish the wireless connection upon startup. If you have a desktop computer with PCI card slots, you can install a WiFi PCI card to make your computer available for wireless connections.
2. Connect a USB cable from the Kodak printer to your computer. This is a requirement for setting up wireless connections with Kodak printers. You can remove the USB cable once you have made the connection between the printer and your computer.
3. Load the Kodak software disc into your computer and follow the instructions for installation of the software and drivers. This software will allow you to set up the Kodak printer for wireless connections if your computer has wireless capabilities. The software disc also includes applications for scanning images from your all-in-one printer.
4. Push the 'Home' button on the printer. This will bring up options on the LCD screen of the printer. Use the arrow keys to scroll down to 'WiFi Setup Wizard.' Select the 'OK' button, then select 'Wireless' from the menu options and click 'OK' again. The printer will take you to a list of potential networks, where you can select the correct one.
5. Disconnect the USB cable once your setup is complete. Turn off the printer, wait a few minutes, then turn it back on. Give it time to start up and then you should see the WiFi light appear on the printer. If it flashes, it means there may be a problem with the connection. If it is a steady light, you have connected your printer correctly.
2. Connect a USB cable from the Kodak printer to your computer. This is a requirement for setting up wireless connections with Kodak printers. You can remove the USB cable once you have made the connection between the printer and your computer.
3. Load the Kodak software disc into your computer and follow the instructions for installation of the software and drivers. This software will allow you to set up the Kodak printer for wireless connections if your computer has wireless capabilities. The software disc also includes applications for scanning images from your all-in-one printer.
4. Push the 'Home' button on the printer. This will bring up options on the LCD screen of the printer. Use the arrow keys to scroll down to 'WiFi Setup Wizard.' Select the 'OK' button, then select 'Wireless' from the menu options and click 'OK' again. The printer will take you to a list of potential networks, where you can select the correct one.
5. Disconnect the USB cable once your setup is complete. Turn off the printer, wait a few minutes, then turn it back on. Give it time to start up and then you should see the WiFi light appear on the printer. If it flashes, it means there may be a problem with the connection. If it is a steady light, you have connected your printer correctly.
How to Close Facebook on an Android Phone
1. Tap 'Home' on the Android phone, then tap 'Menu' to view the expanded home screen.
2. Tap 'Facebook,' then tap the 'facebook' logo at the top of the screen.
3. Tap 'Menu' on the Android, then tap 'Logout.' The Facebook log-in page is displayed when the account is logged out.
4. Tap 'Home' to exit to the phone's home screen.
2. Tap 'Facebook,' then tap the 'facebook' logo at the top of the screen.
3. Tap 'Menu' on the Android, then tap 'Logout.' The Facebook log-in page is displayed when the account is logged out.
4. Tap 'Home' to exit to the phone's home screen.
How to Perform Printer Maintenance (14 Steps)
1. Turn off the printer and unplug any attached cables. Move the printer to a good accessible location.
2. Remove paper trays. Open the printer cover and gently remove the toner cartridge, being careful not to shake it. Place it on a clean sheet of paper.
3. Clean the inside of the printer with a lint-free cloth. Laser printers sometimes come with a small brush for cleaning the toner dust from the hard-to-reach spots. If one is not supplied, you can use a clean, dry paintbrush.
4. Moisten a cotton swab with rubbing alcohol and gently clean the rollers to remove any buildup.
5. Replace the toner cartridge once the unit is cleaned and dry. Close the cover and clean the outside of the printer with a cloth moistened with a mild cleaner suitable for plastic.
6. Wipe down the paper trays with a clean cloth and replace. Return the printer to its normal location and plug the cables in.
7. Print a blank page to remove any last dust or toner particles.
Inkjet Printer Maintenance
1. Turn the printer off, unplug the cables and move to a good location for cleaning.
2. Remove paper. Open the printer to gain access to the ink cartridges and paper rollers. Check to see if there are any ink drips or stains on the inside of the unit. Clean the ink spots with a cotton swab moistened with rubbing alcohol.
3. Moisten a clean cotton swab with rubbing alcohol and gently clean the paper rollers. If the swab gets dirty, use a new swab. Using a lint-free cloth, wipe the inside of the printer to remove the dust from the printer. Close printer cover. Using a cloth moistened with a gentle safe-for-plastic cleaner, wipe the outside of the printer.
4. Return the printer to its usual spot. Plug in the cables and replace the paper in the paper tray. Turn the printer on and open the printer's software program.
5. Go to the Tools section of your printer software and run a print head cleaning cycle, following the onscreen instructions.
6. Before you install a new ink cartridge, take a cotton swab moistened with rubbing alcohol and gently wipe the contacts in the receptacle where the new ink cartridge will go. This keeps the contacts clean and helps prevent printing problems and ink error messages.
7. Print at least one page a week to keep the ink nozzles on the cartridge clear and clog-free.
2. Remove paper trays. Open the printer cover and gently remove the toner cartridge, being careful not to shake it. Place it on a clean sheet of paper.
3. Clean the inside of the printer with a lint-free cloth. Laser printers sometimes come with a small brush for cleaning the toner dust from the hard-to-reach spots. If one is not supplied, you can use a clean, dry paintbrush.
4. Moisten a cotton swab with rubbing alcohol and gently clean the rollers to remove any buildup.
5. Replace the toner cartridge once the unit is cleaned and dry. Close the cover and clean the outside of the printer with a cloth moistened with a mild cleaner suitable for plastic.
6. Wipe down the paper trays with a clean cloth and replace. Return the printer to its normal location and plug the cables in.
7. Print a blank page to remove any last dust or toner particles.
Inkjet Printer Maintenance
1. Turn the printer off, unplug the cables and move to a good location for cleaning.
2. Remove paper. Open the printer to gain access to the ink cartridges and paper rollers. Check to see if there are any ink drips or stains on the inside of the unit. Clean the ink spots with a cotton swab moistened with rubbing alcohol.
3. Moisten a clean cotton swab with rubbing alcohol and gently clean the paper rollers. If the swab gets dirty, use a new swab. Using a lint-free cloth, wipe the inside of the printer to remove the dust from the printer. Close printer cover. Using a cloth moistened with a gentle safe-for-plastic cleaner, wipe the outside of the printer.
4. Return the printer to its usual spot. Plug in the cables and replace the paper in the paper tray. Turn the printer on and open the printer's software program.
5. Go to the Tools section of your printer software and run a print head cleaning cycle, following the onscreen instructions.
6. Before you install a new ink cartridge, take a cotton swab moistened with rubbing alcohol and gently wipe the contacts in the receptacle where the new ink cartridge will go. This keeps the contacts clean and helps prevent printing problems and ink error messages.
7. Print at least one page a week to keep the ink nozzles on the cartridge clear and clog-free.
How to Reset Ricoh Gx3050 Ink Cartridge (9 Steps)
1. Remove the packaging from the new ink cartridges. Each cartridge will be packaged and wrapped individually.
2. Open the front cover of the printer toward you.
3. Remove all empty ink cartridges by pulling them toward you. They will slide out and can then be either recycled or discarded.
4. Remove all packaging and tape, and slide in the new ink cartridges. The new cartridges will slide into place and will 'click' when secured. Be certain to install the new ink in the correct slot. The inks are arranged from left to right at black, cyan, magenta and yellow.
5. Close the front panel.
Reset the Ink CPU
1. Press the 'System Menu' button. This button is on the top, right side of the printer.
2. Scroll through the options until the display reads 'Ink CPU Replace.' The scroll buttons are below the 'System Menu' button.
3. Press 'Enter.' This will reset the ink CPU.
4. Press 'Exit' to return to the normal operating mode.
2. Open the front cover of the printer toward you.
3. Remove all empty ink cartridges by pulling them toward you. They will slide out and can then be either recycled or discarded.
4. Remove all packaging and tape, and slide in the new ink cartridges. The new cartridges will slide into place and will 'click' when secured. Be certain to install the new ink in the correct slot. The inks are arranged from left to right at black, cyan, magenta and yellow.
5. Close the front panel.
Reset the Ink CPU
1. Press the 'System Menu' button. This button is on the top, right side of the printer.
2. Scroll through the options until the display reads 'Ink CPU Replace.' The scroll buttons are below the 'System Menu' button.
3. Press 'Enter.' This will reset the ink CPU.
4. Press 'Exit' to return to the normal operating mode.
How Do I Connect a Wireless Laptop to a Wireless Printer?
1. Connect the printer to your wireless router. Different brands of printers require slightly different processes to do this. Some printers can connect to your router through their own programming; simply find the 'Setup' option on your printer's screen and provide your wireless network's name and password when prompted. Other brands or models may require that you temporarily connect the printer to the router with an Ethernet cable. If this is the case, the cable should be supplied with the printer.
2. Install the software for your printer on your computer. You can do this with an installation CD that came with the printer or with an Internet download from the manufacturer's website. Follow the prompts that appear on your screen and provide information required such as your wireless network's name and password, if necessary. You may need to temporarily disable firewall settings to complete the setup process.
3. Print a test page once the software installation is complete. You can now print from your laptop to the printer and can disconnect the cord connecting the printer to the router, if necessary. Repeat the software installation process on every computer you want to use with the printer.
2. Install the software for your printer on your computer. You can do this with an installation CD that came with the printer or with an Internet download from the manufacturer's website. Follow the prompts that appear on your screen and provide information required such as your wireless network's name and password, if necessary. You may need to temporarily disable firewall settings to complete the setup process.
3. Print a test page once the software installation is complete. You can now print from your laptop to the printer and can disconnect the cord connecting the printer to the router, if necessary. Repeat the software installation process on every computer you want to use with the printer.
How to Connect an Epson Projector to a Computer
1. Plug the included USB cable into the USB Output port on the projector.
2. Plug the other end of the USB cable into any available USB port on the computer. The computer will immediately recognize and configure the device.
3. Power on the projector to complete the connection.
2. Plug the other end of the USB cable into any available USB port on the computer. The computer will immediately recognize and configure the device.
3. Power on the projector to complete the connection.
How to Blow Up a Photo ID Before Faxing (6 Steps)
1. Locate a copier to make a copy of the photo ID. Put the photo ID face down on the glass of the photocopier and close the top cover.
2. Press the 'Enlarge' or 'Resize' button on the copier and choose the option to make the image larger than 100 percent. The higher the percentage you choose, the larger the copy of the image will become. Selecting 200 percent will double the image, 300 percent will triple the image, and so on.
3. Press 'Copy' or 'Start' to make the copy. Check the image to verify the size and for clarity. If the image is not legible, adjust the size and copy the image again.
4. Take the selected image of the photo ID from the photocopier and go to the fax machine.
5. Locate the number of the recipient wanting to receive the fax. Place the copy of the photo ID face down on the document feeder of the fax machine.
6. Dial the recipient's fax number and press 'Send.' The fax machine will transmit the enlarged copy of your photo ID to the designated recipient.
2. Press the 'Enlarge' or 'Resize' button on the copier and choose the option to make the image larger than 100 percent. The higher the percentage you choose, the larger the copy of the image will become. Selecting 200 percent will double the image, 300 percent will triple the image, and so on.
3. Press 'Copy' or 'Start' to make the copy. Check the image to verify the size and for clarity. If the image is not legible, adjust the size and copy the image again.
4. Take the selected image of the photo ID from the photocopier and go to the fax machine.
5. Locate the number of the recipient wanting to receive the fax. Place the copy of the photo ID face down on the document feeder of the fax machine.
6. Dial the recipient's fax number and press 'Send.' The fax machine will transmit the enlarged copy of your photo ID to the designated recipient.
How to Install an HP LaserJet 3050 Printer Without a Disk
1. Plug the HP LaserJet 3050 printer into a power source. Connect the printer's USB cord to your computer. Turn the printer on.
2. Open your web browser and visit the Hewlett-Packard website.
3. Click on the 'Support and Drivers' button on the toolbar.
4. Select 'Download drivers and software (and firmware).' Type 'HP LaserJet 3050' in the search text box and press 'Go.'
5. Choose your operating system by clicking on the appropriate link.
6. Scroll down the page until you see the 'Driver' section. Click on the 'Download' button next to the driver. Some operating systems have multiple driver choices for this printer. However, most users require the first choice, with 'PL6' listed at the end of the driver's name.
7. Press the 'Save File' button from the pop-up window. Once the driver finishes downloading, press 'Run' to install. The driver is 15.2 MB in size; download times vary depending on your Internet connection.
8. Follow the onscreen prompts to finish your installation. Once completed, your HP LaserJet 3050 printer is ready for use.
2. Open your web browser and visit the Hewlett-Packard website.
3. Click on the 'Support and Drivers' button on the toolbar.
4. Select 'Download drivers and software (and firmware).' Type 'HP LaserJet 3050' in the search text box and press 'Go.'
5. Choose your operating system by clicking on the appropriate link.
6. Scroll down the page until you see the 'Driver' section. Click on the 'Download' button next to the driver. Some operating systems have multiple driver choices for this printer. However, most users require the first choice, with 'PL6' listed at the end of the driver's name.
7. Press the 'Save File' button from the pop-up window. Once the driver finishes downloading, press 'Run' to install. The driver is 15.2 MB in size; download times vary depending on your Internet connection.
8. Follow the onscreen prompts to finish your installation. Once completed, your HP LaserJet 3050 printer is ready for use.
How to Clean an HP LaserJet (8 Steps)
1. Clean the outside of the machine using a slightly damp cloth. Do not use the cloth on the inside of the machine.
2. Open the printer cover and remove the toner cartridge. Using a dry, lint-free cloth, wipe down all interior surfaces.
3. Download and install the HP Laserjet Cleaning Utility from the HP website (see Resources.) Installation merely requires copying the files onto your hard drive.
4. Once the files have been copied, open HPPCLEAN.EXE.
5. Select 'Clean' from the main menu. This will bring up the 'Print' screen. Select your model of printer.
6. Select the number of cleaning pages to print. The default number is three; extremely dirty printers may require anywhere from six to twenty pages to thoroughly clean them. If you have been cleaning the printer regularly, three pages should be sufficient. If prints are emerging extremely smudged, with the spaces in letters filled with ink and lines appearing in the margins of the paper, select 10 or more pages. If in doubt, select more cleaning pages -- the printer will not be harmed by excess prints.
7. Click 'OK.' The printer will cycle through the cleaning process by printing several different patterns on one or more sheets of paper. The patterns clean the fuser and print head as they are printed. When the process is complete (which may take up to 15 minutes) dispose of the pages in the recycle bin.
8. Print a test page to ensure that the printer is working satisfactorily again. If prints are still smudged, run the cleaning cycle again.
2. Open the printer cover and remove the toner cartridge. Using a dry, lint-free cloth, wipe down all interior surfaces.
3. Download and install the HP Laserjet Cleaning Utility from the HP website (see Resources.) Installation merely requires copying the files onto your hard drive.
4. Once the files have been copied, open HPPCLEAN.EXE.
5. Select 'Clean' from the main menu. This will bring up the 'Print' screen. Select your model of printer.
6. Select the number of cleaning pages to print. The default number is three; extremely dirty printers may require anywhere from six to twenty pages to thoroughly clean them. If you have been cleaning the printer regularly, three pages should be sufficient. If prints are emerging extremely smudged, with the spaces in letters filled with ink and lines appearing in the margins of the paper, select 10 or more pages. If in doubt, select more cleaning pages -- the printer will not be harmed by excess prints.
7. Click 'OK.' The printer will cycle through the cleaning process by printing several different patterns on one or more sheets of paper. The patterns clean the fuser and print head as they are printed. When the process is complete (which may take up to 15 minutes) dispose of the pages in the recycle bin.
8. Print a test page to ensure that the printer is working satisfactorily again. If prints are still smudged, run the cleaning cycle again.
How to Convert Your Speaker to Bluetooth (4 Steps)
1. Plug the cables coming out of your speakers into a Bluetooth speaker dongle/adapter.
2. Power on your speakers. This should also power on the Bluetooth dongle/adapter connected to your speakers.
3. Have your computer, MP3 player, phone or other device search for Bluetooth devices. This is typically an option under the 'Settings' menu on your device.
4. Select your Bluetooth dongle from the list of items that appears and enter the pairing code for the dongle in order to connect the two devices together. The pairing code is a small series of numbers that will be on a sticker on the dongle itself or on its instruction book.
2. Power on your speakers. This should also power on the Bluetooth dongle/adapter connected to your speakers.
3. Have your computer, MP3 player, phone or other device search for Bluetooth devices. This is typically an option under the 'Settings' menu on your device.
4. Select your Bluetooth dongle from the list of items that appears and enter the pairing code for the dongle in order to connect the two devices together. The pairing code is a small series of numbers that will be on a sticker on the dongle itself or on its instruction book.
Friday, March 27, 2015
How to Print on Banner Paper
1. Check your printer's user guide to ensure your printer will work with banner paper.
2. Create your banner using software or an online program.
3. Determine a size for the banner. Normal banners measure about 36 to 48 inches long. For instance, if you want to print a message such as 'Go Marketing Team' and you intend to place the banner above the water cooler in the office, limit the banner to 36 inches. However, if you were to print a longer message, such as 'Congratulations, Stephanie and Alexander,' and intend to place the banner behind a stage in a community building, make the banner at least 72 inches long.
4. Load the banner paper into the printer. Adjust the feed guides to match the banner paper. Provide a clear path for the banner paper, which will allow it to flow freely into the printer. Line up the paper completely straight with the printer to avoid paper jams.
5. Remove the banner paper once you have printed it. Store banner paper in a flat, dry area.
2. Create your banner using software or an online program.
3. Determine a size for the banner. Normal banners measure about 36 to 48 inches long. For instance, if you want to print a message such as 'Go Marketing Team' and you intend to place the banner above the water cooler in the office, limit the banner to 36 inches. However, if you were to print a longer message, such as 'Congratulations, Stephanie and Alexander,' and intend to place the banner behind a stage in a community building, make the banner at least 72 inches long.
4. Load the banner paper into the printer. Adjust the feed guides to match the banner paper. Provide a clear path for the banner paper, which will allow it to flow freely into the printer. Line up the paper completely straight with the printer to avoid paper jams.
5. Remove the banner paper once you have printed it. Store banner paper in a flat, dry area.
How to use a Brother fax Machine
1. Check that the Brother fax machine is plugged in to a standard electrical outlet and that the telephone cord is properly plugged into a working telephone jack and the power is on.
2. Open the paper cover by pulling it forward. Load up to 100 sheets of copier paper into the paper cassette. Make sure the amount of paper loaded does not exceed the maximum paper line on the paper guide. Close the paper cover by pushing it backward.
3. Place your original document into the document feeder face down, top edge first. Adjust the document edge guides in or out to fit your original document. Press the speaker phone button to insure there is a dial tone.
4. Enter the fax number you wish to call by pressing the corresponding numeric keys on the dial pad. Listen for the connection fax tone. Once the fax is connected press the Fax Start button. The fax machine will automatically disconnect once the transmission is complete.
2. Open the paper cover by pulling it forward. Load up to 100 sheets of copier paper into the paper cassette. Make sure the amount of paper loaded does not exceed the maximum paper line on the paper guide. Close the paper cover by pushing it backward.
3. Place your original document into the document feeder face down, top edge first. Adjust the document edge guides in or out to fit your original document. Press the speaker phone button to insure there is a dial tone.
4. Enter the fax number you wish to call by pressing the corresponding numeric keys on the dial pad. Listen for the connection fax tone. Once the fax is connected press the Fax Start button. The fax machine will automatically disconnect once the transmission is complete.
How to Reset a Canon Pixma Printer (5 Steps)
1. Press the 'On/Off' button on the machine if it is not already turned on.
2. Press 'Menu' until 'Device Settings' appears on the printer's display.
3. Use the 'Front' and 'Back' arrows to locate the 'Restore Default' setting.
4. Press 'OK.'
5. Press 'OK' again to verify your choice. The printer will reset itself to its factory settings.
2. Press 'Menu' until 'Device Settings' appears on the printer's display.
3. Use the 'Front' and 'Back' arrows to locate the 'Restore Default' setting.
4. Press 'OK.'
5. Press 'OK' again to verify your choice. The printer will reset itself to its factory settings.
Instructions for an HP PSC 1510 All
1. Power on your computer if it is not already so to allow it to be fully booted when it is required later in the setup process.
2. Unpack your printer if it is a new purchase by removing all tape, cardboard and packing materials from the unit. Separate all materials included in the box on a table or across an open space of floor for easy access and identification.
3. Place your printer in its intended place on your desk or work area, but leave it turned for easy access to both the front and back panels until installation is complete.
4. Attach your control panel's overlay. This looks like a sticker, but it locks into place over the control panel of the printer with the visible edge-tabs instead of an adhesive. Lock the panel into place while avoiding pressing the panel buttons.
5. Plug in the power supply cords. There are two cords included with your printer. One plugs directly into the back of the printer and contains a transformer box while the other plugs into the transformer box on one end and your standard household electrical outlet on the other.
6. Turn on the printer by pressing the power button and load 8-1/2-inch by 11-inch paper into the paper tray.
7. Open the front access door on the printer. It is located underneath the scanner bed and faces out from the front of the unit when the paper catch tray is lowered.
8. Install the ink cartridges included with your printer by removing the tape from each cartridge and then snapping each into its respective tray within the printer. When the cartridges are installed and the door shut, a print cartridge alignment page will print.
9. Place the alignment page onto your scanner bed. Follow the instructions printed on the alignment page in reference to paper placement on the scanner. Push the 'Start Scan' button on your unit and wait for the alignment process to conclude.
10. Insert the included software CD into your computer's CD-ROM drive. If you no longer have the software discs included with your printer, the HP website offers software and driver downloads for the PSC 1510. Follow the software installation prompts until your are instructed to hook up a USB cable to your printer.
11. Plug the USB cable into the USB port on your computer and then into the back of the printer. A new or previously used USB cable can be plugged into the 1510 as it does not include a manufacturer-provided cable. Follow the remaining software installation prompts until you are told installation is complete.
Printing, Scanning and Copying
1. Click 'File' followed by 'Print' and select the HP PSC 1510 in the printer dialogue box. You're now ready to print information from the Web or documents and photos created and edited within your computer's programs.
2. Place a picture or document onto the scanner bed. Press the 'Start scan' button on your all-in-one unit to launch a scan into your computer's default scanning program. If you want to scan a picture or document into a scanner-compatible editing program that is already open on your desktop, click 'File' followed by 'Import' and select the 1510 to begin your scan.
3. Insert the picture or document you want to copy onto the scanner bed and press 'Start black copy' or 'Start color copy' to begin a single copy. Press the 'Copies' button up to nine times prior to starting a copy job to trigger multiple copies of your document or photo. A small LCD display on the unit alerts you to how many copies you have chosen to generate.
2. Unpack your printer if it is a new purchase by removing all tape, cardboard and packing materials from the unit. Separate all materials included in the box on a table or across an open space of floor for easy access and identification.
3. Place your printer in its intended place on your desk or work area, but leave it turned for easy access to both the front and back panels until installation is complete.
4. Attach your control panel's overlay. This looks like a sticker, but it locks into place over the control panel of the printer with the visible edge-tabs instead of an adhesive. Lock the panel into place while avoiding pressing the panel buttons.
5. Plug in the power supply cords. There are two cords included with your printer. One plugs directly into the back of the printer and contains a transformer box while the other plugs into the transformer box on one end and your standard household electrical outlet on the other.
6. Turn on the printer by pressing the power button and load 8-1/2-inch by 11-inch paper into the paper tray.
7. Open the front access door on the printer. It is located underneath the scanner bed and faces out from the front of the unit when the paper catch tray is lowered.
8. Install the ink cartridges included with your printer by removing the tape from each cartridge and then snapping each into its respective tray within the printer. When the cartridges are installed and the door shut, a print cartridge alignment page will print.
9. Place the alignment page onto your scanner bed. Follow the instructions printed on the alignment page in reference to paper placement on the scanner. Push the 'Start Scan' button on your unit and wait for the alignment process to conclude.
10. Insert the included software CD into your computer's CD-ROM drive. If you no longer have the software discs included with your printer, the HP website offers software and driver downloads for the PSC 1510. Follow the software installation prompts until your are instructed to hook up a USB cable to your printer.
11. Plug the USB cable into the USB port on your computer and then into the back of the printer. A new or previously used USB cable can be plugged into the 1510 as it does not include a manufacturer-provided cable. Follow the remaining software installation prompts until you are told installation is complete.
Printing, Scanning and Copying
1. Click 'File' followed by 'Print' and select the HP PSC 1510 in the printer dialogue box. You're now ready to print information from the Web or documents and photos created and edited within your computer's programs.
2. Place a picture or document onto the scanner bed. Press the 'Start scan' button on your all-in-one unit to launch a scan into your computer's default scanning program. If you want to scan a picture or document into a scanner-compatible editing program that is already open on your desktop, click 'File' followed by 'Import' and select the 1510 to begin your scan.
3. Insert the picture or document you want to copy onto the scanner bed and press 'Start black copy' or 'Start color copy' to begin a single copy. Press the 'Copies' button up to nine times prior to starting a copy job to trigger multiple copies of your document or photo. A small LCD display on the unit alerts you to how many copies you have chosen to generate.
How to Install a HP Officejet 6500
1. Examine the front of the printer and locate the control panel. Fit the control panel faceplate over the buttons on the control panel. Push down on the faceplate until it is securely in place. Connect the printer's power cord to the power adapter.
2. Examine the right side of the printer and locate the array of ports. Plug the power adapter into the power port, then plug the end of the power cord into a nearby outlet. Plug one end of the USB cable into the USB port, located next to the power port. Press the power button, located in the lower-right corner of the control panel. Wait for the printer to power on before proceeding.
3. Examine the display on the control panel. Follow the instructions shown on the display to input the printer's language and country settings. Reach under the front edge of the control panel. Lift the top section of the printer upwards.
4. Wait for the print carriage to move into view. Lift the lever on the right side of the print carriage. Remove the orange plastic from the printhead and insert it into the print carriage. Lower the lever.
5. Remove the orange cap from the end of the cyan ink cartridge. Examine the row of colored dots printed on the top of the printhead and find the cyan circle. Insert the cyan ink cartridge into the corresponding slot on the printhead. Push down on the cartridge until it snaps into place. Install the magenta, yellow and black ink cartridges in a similar manner.
6. Lift the paper output tray upwards and insert a stack of plain paper into the paper input tray. Align the paper guides with the edges of the stack of paper. Lower the paper output tray and pull out the output tray extension.
7. Insert the installation CD into your computer's optical drive; if you are using a Macintosh, connect the USB cable to your computer. Run the installer application and follow the on-screen instructions; if you are using a Windows PC, the computer will prompt you at the appropriate time to connect the USB cable.
2. Examine the right side of the printer and locate the array of ports. Plug the power adapter into the power port, then plug the end of the power cord into a nearby outlet. Plug one end of the USB cable into the USB port, located next to the power port. Press the power button, located in the lower-right corner of the control panel. Wait for the printer to power on before proceeding.
3. Examine the display on the control panel. Follow the instructions shown on the display to input the printer's language and country settings. Reach under the front edge of the control panel. Lift the top section of the printer upwards.
4. Wait for the print carriage to move into view. Lift the lever on the right side of the print carriage. Remove the orange plastic from the printhead and insert it into the print carriage. Lower the lever.
5. Remove the orange cap from the end of the cyan ink cartridge. Examine the row of colored dots printed on the top of the printhead and find the cyan circle. Insert the cyan ink cartridge into the corresponding slot on the printhead. Push down on the cartridge until it snaps into place. Install the magenta, yellow and black ink cartridges in a similar manner.
6. Lift the paper output tray upwards and insert a stack of plain paper into the paper input tray. Align the paper guides with the edges of the stack of paper. Lower the paper output tray and pull out the output tray extension.
7. Insert the installation CD into your computer's optical drive; if you are using a Macintosh, connect the USB cable to your computer. Run the installer application and follow the on-screen instructions; if you are using a Windows PC, the computer will prompt you at the appropriate time to connect the USB cable.
How to Use a Parallel Printer on USB Port (5 Steps)
1. Shut down the computer. Although this is not an imperative step, it's best to turn off a computer before attaching any accessory components.
2. Attach the parallel-to-USB adapter into the parallel cable on the printer. The parallel cable is a large, 25-pin connector, so it's easily distinguishable from the USB port. Connect it to the parallel port of the printer and ensure it's tightly attached.
3. Attach the other side of the adapter to the USB port on the computer. Ensure the connection is tightly faceted into the port.
4. Turn on the computer and log into the machine. Upon start-up, the computer should detect the newly installed printer.
5. Insert the driver CD disk into the drive. The driver installation process should start immediately. Follow the prompts to install the drivers onto the computer. At this point the printer is completely installed, and you can use it on the USB port.
2. Attach the parallel-to-USB adapter into the parallel cable on the printer. The parallel cable is a large, 25-pin connector, so it's easily distinguishable from the USB port. Connect it to the parallel port of the printer and ensure it's tightly attached.
3. Attach the other side of the adapter to the USB port on the computer. Ensure the connection is tightly faceted into the port.
4. Turn on the computer and log into the machine. Upon start-up, the computer should detect the newly installed printer.
5. Insert the driver CD disk into the drive. The driver installation process should start immediately. Follow the prompts to install the drivers onto the computer. At this point the printer is completely installed, and you can use it on the USB port.
How to Set Up My Email on My Brother LC61 (5 Steps)
1. Type 'Menu' on the front panel of the printer, strike the number '5' on the keypad twice and hit 'Start.' This begins the email setup process by listing the printer's IP address on the menu screen.
2. Open a web browser on a computer connected to the same network as your printer. Enter the IP number listed on the printer in the address bar.
3. Choose 'Fax Settings' from the web page and enter 'admin' as the username and 'access' as the password when prompted.
4. Select 'Remote Fax Options' from the menu displayed, then select 'Fax Forward' from the 'Fax Forward/Paging' drop-down menu. Enter your email address in the box next to the words 'Fax Forward Number.' Click the circle that says 'On' next to the word 'Fax Storage.' Click 'Submit' to save these settings.
5. Select 'Network Settings' from the top menu and select 'Configure POP3/SMTP.' When prompted, enter the name of the SMTP server for your email address. Find these by opening your mail client, going to the preferences section, then the accounts section. The SMTP server information will be listed along with your email account information. Enter the printer's unique email address in the 'Printer Email Address' box. Select 'Submit' to save the settings.
2. Open a web browser on a computer connected to the same network as your printer. Enter the IP number listed on the printer in the address bar.
3. Choose 'Fax Settings' from the web page and enter 'admin' as the username and 'access' as the password when prompted.
4. Select 'Remote Fax Options' from the menu displayed, then select 'Fax Forward' from the 'Fax Forward/Paging' drop-down menu. Enter your email address in the box next to the words 'Fax Forward Number.' Click the circle that says 'On' next to the word 'Fax Storage.' Click 'Submit' to save these settings.
5. Select 'Network Settings' from the top menu and select 'Configure POP3/SMTP.' When prompted, enter the name of the SMTP server for your email address. Find these by opening your mail client, going to the preferences section, then the accounts section. The SMTP server information will be listed along with your email account information. Enter the printer's unique email address in the 'Printer Email Address' box. Select 'Submit' to save the settings.
How to Get Cable TV on a Projector Without a Cable Box
1. Locate the coaxial cable running into your home. This is the programming input that runs from the outside.
2. Connect the coaxial cable into the coaxial 'In' port on the projector.
3. Power on the projector and wait for the screen to warm up. Due to the bulb in the projector it takes may take a few minutes to complete this process.
4. Push 'Menu,' then select 'Input.' Choose the television tuner option and press 'OK.' The cable programming now appears on the area the projector is producing the image on.
2. Connect the coaxial cable into the coaxial 'In' port on the projector.
3. Power on the projector and wait for the screen to warm up. Due to the bulb in the projector it takes may take a few minutes to complete this process.
4. Push 'Menu,' then select 'Input.' Choose the television tuner option and press 'OK.' The cable programming now appears on the area the projector is producing the image on.
How to Delete All HP Printer Files From My Computer
1. Turn off the printer and disconnect the printer cable from your computer.
2. Open the 'Start' menu and press 'Control Panel.'
3. Click either 'Uninstall a Program' or 'Programs and Features,' depending on your current Control Panel view.
4. Scroll down the list and locate your printer software. The name varies by model, but will start with 'HP.'
5. Click on the printer software listing and press 'Uninstall.' Follow the on-screen prompt to complete the process.
6. Repeat with any additional HP listings if more exist, then close the window.
Removing Drivers
1. Reopen the 'Start' menu and click 'Devices and Printers.'
2. Click on the icon of your HP printer. If the printer doesn't appear, the software uninstall already removed the drivers and you can skip this process. This will vary by model.
3. Click 'Remove Device' and press 'Yes' to confirm.
Deleting Leftover Files
1. Reboot your computer to allow the uninstall process to delete any in-use files.
2. Open the 'Start' menu and click 'Computer.'
3. Open your hard drive, usually 'C:,' and open the 'Program Files' folder.
4. Look for an 'HP' folder. If one exists, click it and press 'Delete' on the keyboard. Right-click on the Recycle Bin and click 'Empty Recycle Bin' to erase the files. If no 'HP' folder remains, the uninstaller already cleaned all the files itself.
5. Repeat the process in the 'Program Files (x86)' folder if your computer has one.
2. Open the 'Start' menu and press 'Control Panel.'
3. Click either 'Uninstall a Program' or 'Programs and Features,' depending on your current Control Panel view.
4. Scroll down the list and locate your printer software. The name varies by model, but will start with 'HP.'
5. Click on the printer software listing and press 'Uninstall.' Follow the on-screen prompt to complete the process.
6. Repeat with any additional HP listings if more exist, then close the window.
Removing Drivers
1. Reopen the 'Start' menu and click 'Devices and Printers.'
2. Click on the icon of your HP printer. If the printer doesn't appear, the software uninstall already removed the drivers and you can skip this process. This will vary by model.
3. Click 'Remove Device' and press 'Yes' to confirm.
Deleting Leftover Files
1. Reboot your computer to allow the uninstall process to delete any in-use files.
2. Open the 'Start' menu and click 'Computer.'
3. Open your hard drive, usually 'C:,' and open the 'Program Files' folder.
4. Look for an 'HP' folder. If one exists, click it and press 'Delete' on the keyboard. Right-click on the Recycle Bin and click 'Empty Recycle Bin' to erase the files. If no 'HP' folder remains, the uninstaller already cleaned all the files itself.
5. Repeat the process in the 'Program Files (x86)' folder if your computer has one.
Thursday, March 26, 2015
How to Modify a Printer to Take Banner Paper (5 Steps)
1. Open the publication you wish to print as a banner. Microsoft Publisher has the option to create a banner.
2. Click 'File' on the menu, then 'Page Setup.' Click the 'Printer and Paper' tab and then click the drop-down menu under 'Paper' to see if the printer supports banner paper. Most inkjet printers have the banner option.
3. Modify your banner's size. You may choose any width you like. To print the banner onto 8.5' continuous banner paper, set the height as 8.5.' Design your banner and save the file.
4. Load the paper tray in the printer with 8.5' wide banner paper and print the publication.
5. Tear the banner paper at its perforated marks, if applicable, to the size of the banner you have printed.
2. Click 'File' on the menu, then 'Page Setup.' Click the 'Printer and Paper' tab and then click the drop-down menu under 'Paper' to see if the printer supports banner paper. Most inkjet printers have the banner option.
3. Modify your banner's size. You may choose any width you like. To print the banner onto 8.5' continuous banner paper, set the height as 8.5.' Design your banner and save the file.
4. Load the paper tray in the printer with 8.5' wide banner paper and print the publication.
5. Tear the banner paper at its perforated marks, if applicable, to the size of the banner you have printed.
How to Disable HP Solution Center (9 Steps)
1. Turn your computer on and wait for Windows to load. Click 'Start' and select 'Computer.' Open the C drive, commonly labeled 'Local Disk' or 'C:' and then open 'Program Files.' Open the HP folder and double-click 'Digital Imaging' then 'Product Assistant.' Select 'Bin' and double-click 'hprbui.exe' to launch the HP product assistant.
2. Click 'Preferences' and 'Disable Notifications.' Select 'Disable Solution Updates' and click 'OK' in the resulting dialog box. Exit the Product Assistant and click 'Start' then 'All Programs.' Click HP then open the HP Solution Center. Alternately, you can type 'HP Solution Center' in the Windows Explorer search bar directly under 'All Programs' to find the software.
3. Click 'Settings' and move the cursor over 'Other' to bring up a menu. Select 'Update Preferences' and un-check the box labeled 'Enable help Contents updates automatically.' Press 'Close' and exit the Solution Center.
Disabling the Program at Startup
1. Press 'Start' and enter 'Windows Defender' in the search box. Click 'Windows Defender' from the resulting list and click 'Tools' at the top of the Windows Defender screen.
2. Click 'Software Explorer' and select 'Startup Programs' from the drop-down menu near the top of the window. Locate the HP Solution Center; if you're having trouble finding it, it should be under the 'HP.'
3. Click 'Disable' to disable the program from starting automatically when Windows starts. Exit Windows Defender to finish the process. To open the HP Solution Center in the future, simply choose it from HP's entry under 'All Programs.'
Delete the HP Solution Center
1. Press 'Start' and 'Control Panel.' Locate 'Programs' and select 'Uninstall a Program.'
2. Navigate through the list of programs until you find the HP Solution Center. Click the 'Uninstall' button located near the top of the window.
3. Follow the on-screen instructions to completely remove the program. This may take several minutes or require you to restart your computer.
2. Click 'Preferences' and 'Disable Notifications.' Select 'Disable Solution Updates' and click 'OK' in the resulting dialog box. Exit the Product Assistant and click 'Start' then 'All Programs.' Click HP then open the HP Solution Center. Alternately, you can type 'HP Solution Center' in the Windows Explorer search bar directly under 'All Programs' to find the software.
3. Click 'Settings' and move the cursor over 'Other' to bring up a menu. Select 'Update Preferences' and un-check the box labeled 'Enable help Contents updates automatically.' Press 'Close' and exit the Solution Center.
Disabling the Program at Startup
1. Press 'Start' and enter 'Windows Defender' in the search box. Click 'Windows Defender' from the resulting list and click 'Tools' at the top of the Windows Defender screen.
2. Click 'Software Explorer' and select 'Startup Programs' from the drop-down menu near the top of the window. Locate the HP Solution Center; if you're having trouble finding it, it should be under the 'HP.'
3. Click 'Disable' to disable the program from starting automatically when Windows starts. Exit Windows Defender to finish the process. To open the HP Solution Center in the future, simply choose it from HP's entry under 'All Programs.'
Delete the HP Solution Center
1. Press 'Start' and 'Control Panel.' Locate 'Programs' and select 'Uninstall a Program.'
2. Navigate through the list of programs until you find the HP Solution Center. Click the 'Uninstall' button located near the top of the window.
3. Follow the on-screen instructions to completely remove the program. This may take several minutes or require you to restart your computer.
How to Reset Epson Chips
1. Make sure that the 'Epson chip resetter' that you have on hand is compatible with the model of printer you are using. Many chip resetters are 'universal,' which means that they can be used with any Epson printer, or any other printer with which it is compatible.
2. Turn on the computer as well as your printer. Open the lid of the printer and carefully remove the cartridge. You may also refer to your printer's manual to know exactly how to remove the cartridge from your printer.
3. If the cartridge has become dirty or oily, wipe it with a tissue or a clean cloth to remove the oil or dirt. Align the 'gold pins' of the chip resetter to the 'gold contacts' of the ink cartridge. As they come in contact, the resetter will flash a red light. After about six seconds, the light should change from red to green, indicating that the chip has been reset.
4. Open the lid of the printer and reinsert the cartridge. Click on 'Start,' and then select 'Printers and Faxes.' Right-click on the name of your printer and select 'Printing Preferences' or something similar. See if it detects that the cartridge is full. If it does, the cartridge has been successfully reset.
2. Turn on the computer as well as your printer. Open the lid of the printer and carefully remove the cartridge. You may also refer to your printer's manual to know exactly how to remove the cartridge from your printer.
3. If the cartridge has become dirty or oily, wipe it with a tissue or a clean cloth to remove the oil or dirt. Align the 'gold pins' of the chip resetter to the 'gold contacts' of the ink cartridge. As they come in contact, the resetter will flash a red light. After about six seconds, the light should change from red to green, indicating that the chip has been reset.
4. Open the lid of the printer and reinsert the cartridge. Click on 'Start,' and then select 'Printers and Faxes.' Right-click on the name of your printer and select 'Printing Preferences' or something similar. See if it detects that the cartridge is full. If it does, the cartridge has been successfully reset.
How to Keep a Printer From Switching to Offline
1. Open the Start menu and click Control Panel.
2. Double-click the Printers and Faxes or Printers and Devices icon.
3. Right-click the icon for the printer that keeps switching to offline mode and choose Properties from the contextual menu that appears.
4. Go to the Ports tab at the top of the pop-up window.
5. Click the button labeled 'Add Port.'
6. Choose Standard TCP/IP Port from the drop-down list and click 'New Port.'
7. Enter the printer's IP address and click 'Next' and 'Finish.' The printer will automatically go online and will stop switching to offline mode.
2. Double-click the Printers and Faxes or Printers and Devices icon.
3. Right-click the icon for the printer that keeps switching to offline mode and choose Properties from the contextual menu that appears.
4. Go to the Ports tab at the top of the pop-up window.
5. Click the button labeled 'Add Port.'
6. Choose Standard TCP/IP Port from the drop-down list and click 'New Port.'
7. Enter the printer's IP address and click 'Next' and 'Finish.' The printer will automatically go online and will stop switching to offline mode.
How to Reset a Canon Copier Code (7 Steps)
1. Tap the 'Additional Functions' button on your Canon copier.
2. Press the '2' and '8' keys on the number pad simultaneously, and then quickly release them.
3. Tap the 'Additional Functions' button again.
4. Tap the 'Copier' button when you see the 'System Management' screen.
5. Press the 'Function' button and then the 'Clear' button.
6. Tap the 'ERR Button' to highlight all error and status codes that are active.
7. Press the 'OK' button, and then restart the copier to finish clearing the error and status codes.
2. Press the '2' and '8' keys on the number pad simultaneously, and then quickly release them.
3. Tap the 'Additional Functions' button again.
4. Tap the 'Copier' button when you see the 'System Management' screen.
5. Press the 'Function' button and then the 'Clear' button.
6. Tap the 'ERR Button' to highlight all error and status codes that are active.
7. Press the 'OK' button, and then restart the copier to finish clearing the error and status codes.
Troubleshooting a HP Printer Printing Backwards
1. Open the program you are looking to print from. This program can be anything from an image editing software program to a word processor.
2. Click 'File' then 'Open' to select the document you want to print. The document then loads into the middle of the display window.
3. Select 'File,' then 'Print' and the print options window appears over the document.
4. Select the printer you want to use and the number of copies you want to print. Uncheck the option to 'Print in Reverse.' If this option is not displayed on the top printer options page, click 'Options' and additional settings appear. Uncheck the print in reverse option to remove this feature, then click 'OK.' Your document should now print starting with the document's first page.
2. Click 'File' then 'Open' to select the document you want to print. The document then loads into the middle of the display window.
3. Select 'File,' then 'Print' and the print options window appears over the document.
4. Select the printer you want to use and the number of copies you want to print. Uncheck the option to 'Print in Reverse.' If this option is not displayed on the top printer options page, click 'Options' and additional settings appear. Uncheck the print in reverse option to remove this feature, then click 'OK.' Your document should now print starting with the document's first page.
How to Repair a 933 Printhead Error T640 (5 Steps)
1. Press and hold the power button on the front of the Lexmark printer until the device turns off. Wait one full minute, and tap the power button again. Open a text document, and try printing again to see if the issue is resolved.
2. If the problem continues, turn off the printer, and unplug its power cable. Push the release latch at the front of the printer, and pull down the lower plastic door. Press the release latch inside the top plastic door, and lift the door upward.
3. Push the two latches at the far left end of the printer. Pull the plastic door at the left end of the printer toward the left. Use a Phillips screwdriver to loosen six screws holding the metal shield to the left end of the printer, but do not completely remove them.
4. Move the metal shield over to the right to reveal the multi-colored cable at the top of the system board. Unplug the cable and plug it back in. Check to ensure the cable is properly seated and is making a full connection.
5. Slide the metal shield back into its original position, and tighten the screws you loosened earlier. Push the three plastic doors back into place, and plug in the printer's power cable. Tap the power button, and start a new print job.
2. If the problem continues, turn off the printer, and unplug its power cable. Push the release latch at the front of the printer, and pull down the lower plastic door. Press the release latch inside the top plastic door, and lift the door upward.
3. Push the two latches at the far left end of the printer. Pull the plastic door at the left end of the printer toward the left. Use a Phillips screwdriver to loosen six screws holding the metal shield to the left end of the printer, but do not completely remove them.
4. Move the metal shield over to the right to reveal the multi-colored cable at the top of the system board. Unplug the cable and plug it back in. Check to ensure the cable is properly seated and is making a full connection.
5. Slide the metal shield back into its original position, and tighten the screws you loosened earlier. Push the three plastic doors back into place, and plug in the printer's power cable. Tap the power button, and start a new print job.
How to Refurbish a Laser Printer Drum
1. Turn off the printer. Put on latex gloves for extra safety when handling toner inks. Replace the toner cartridge. Print a test page with the new cartridge installed. If the quality of the print is improved, then the drum does not need to be cleaned or replaced. Otherwise, leave the printer off for at least an hour before proceeding with the drum.
2. Open the printer lid and inspect the drum for marks, debris, scratches or lines. Often, if such ink marks or debris exist, these marks will reflect the marks on the printed paper. If such marks do not exist on the drum, you may also need to check the fuser for marks or signs of deterioration. The fuser may need to be sent back to your lender for replacement.
3. Remove the three adjacent rollers before removing the drum. Use a screwdriver to pry out the E-clips next to the drum. The drum is photosensitive, so be cautious upon removal and make sure the drum is not exposed to light for long periods of time. Put the rollers on a piece of paper to avoid surface stains.
4. Use cotton swabs to wipe away excess toner on the drum. Reinstall the drum in the reverse order in which it was removed. If printing is still problematic, the drum may be in disrepair and must be replaced. Contact your lender on instructions as to how to return it. Do not discard the drum.
2. Open the printer lid and inspect the drum for marks, debris, scratches or lines. Often, if such ink marks or debris exist, these marks will reflect the marks on the printed paper. If such marks do not exist on the drum, you may also need to check the fuser for marks or signs of deterioration. The fuser may need to be sent back to your lender for replacement.
3. Remove the three adjacent rollers before removing the drum. Use a screwdriver to pry out the E-clips next to the drum. The drum is photosensitive, so be cautious upon removal and make sure the drum is not exposed to light for long periods of time. Put the rollers on a piece of paper to avoid surface stains.
4. Use cotton swabs to wipe away excess toner on the drum. Reinstall the drum in the reverse order in which it was removed. If printing is still problematic, the drum may be in disrepair and must be replaced. Contact your lender on instructions as to how to return it. Do not discard the drum.
How to Fix Print Spooler Problems
1. Click the 'Start' button and choose 'Control Panel' from the menu. Click the 'Classic View' button to see the full list of control panel icons.
2. Double-click the 'Administrative Tools' icon and then the 'Services' icon. Scroll down the list of services until you see the 'Print Spooler.'
3. Right-click on the 'Print Spooler' option and choose 'Start' to start the service. Watch the screen until the status of the service changes to 'Started.'
4. Double-click the 'Print Spooler' service to open its properties window. Go to the 'Startup Type' and change the option to 'Automatic.' Changing the service to automatic means that it will start automatically each time your computer reboots.
5. Restart your computer and log back on. Send your print job to the printer and make sure the output prints properly.
2. Double-click the 'Administrative Tools' icon and then the 'Services' icon. Scroll down the list of services until you see the 'Print Spooler.'
3. Right-click on the 'Print Spooler' option and choose 'Start' to start the service. Watch the screen until the status of the service changes to 'Started.'
4. Double-click the 'Print Spooler' service to open its properties window. Go to the 'Startup Type' and change the option to 'Automatic.' Changing the service to automatic means that it will start automatically each time your computer reboots.
5. Restart your computer and log back on. Send your print job to the printer and make sure the output prints properly.
How to Connect a Samsung Mobile to a PC (5 Steps)
1. Find a mobile data sync kit for your Samsung phone. This comes with a USB cable and a piece of software that will allow you to connect your phone to your computer and download the data to it. You can purchase these online (see Resources) or from your local cell phone shop.
2. Insert the CD-ROM that came with the kit into your computer's drive. Install the software by following the instructions on the screen.
3. Turn your computer on and plug the data cable into the bottom of your Samsung phone. Plug the other end of the cable into the USB port and wait for a few seconds. Windows will detect the new hardware and ask you to install drivers for it.
4. Click on 'Have Disk' then 'Browse' and locate them on your CD-ROM drive. Double-click on the drivers and wait for them to install.
5. Open up the application that you installed by clicking on the 'Start' menu. Once it opens, go to 'File' and 'Sync Files' to download your data to your computer. You can also go to your 'Start' and 'Computer' and you will see your Samsung phone listed as an extra drive. Double-click on it and you can drag and drop your files to your desktop.
2. Insert the CD-ROM that came with the kit into your computer's drive. Install the software by following the instructions on the screen.
3. Turn your computer on and plug the data cable into the bottom of your Samsung phone. Plug the other end of the cable into the USB port and wait for a few seconds. Windows will detect the new hardware and ask you to install drivers for it.
4. Click on 'Have Disk' then 'Browse' and locate them on your CD-ROM drive. Double-click on the drivers and wait for them to install.
5. Open up the application that you installed by clicking on the 'Start' menu. Once it opens, go to 'File' and 'Sync Files' to download your data to your computer. You can also go to your 'Start' and 'Computer' and you will see your Samsung phone listed as an extra drive. Double-click on it and you can drag and drop your files to your desktop.
How to Troubleshoot a Dell Wireless Mouse
1. Check the wireless connection. For Dell mice with USB receivers, proceed to Step 2. For Dell mice with Bluetooth connections, proceed to Step 3.
2. Make sure that the USB receiver is turned on. Some Dell models have a small button or switch on the receiver. Push this and wait for the small light to come on. If there is no light, remove the receiver and try plugging it into another USB port.
3. Check the Bluetooth connectivity. Locate the Bluetooth icon (see Resources) in the lower right of the Windows desktop. You may need to click the small arrow to expose all of the icons.
4. Right-click the Bluetooth logo and verify that the connection is on. If not, select 'Make Discoverable' or 'Turn on Bluetooth.' Wait for the icon to light up. Press the small connection button on the underside of the mouse to sync the device.
5. Turn the mouse over and remove the battery compartment. Replace the batteries with fresh batteries. Most Dell wireless mice take AA batteries.
6. Verify that the mouse is positioned on a flat surface that is not reflective. You can place a standard piece of white printer paper under the mouse to prevent reflective surfaces from confusing the optics of the mouse.
7. Press the small connection button on the underside of the mouse to ensure the mouse is on and sending and receiving signals from the USB receiver or Bluetooth. If you've reset the receiver, computer or Bluetooth connection, you may need to push this button once more to sync the device.
2. Make sure that the USB receiver is turned on. Some Dell models have a small button or switch on the receiver. Push this and wait for the small light to come on. If there is no light, remove the receiver and try plugging it into another USB port.
3. Check the Bluetooth connectivity. Locate the Bluetooth icon (see Resources) in the lower right of the Windows desktop. You may need to click the small arrow to expose all of the icons.
4. Right-click the Bluetooth logo and verify that the connection is on. If not, select 'Make Discoverable' or 'Turn on Bluetooth.' Wait for the icon to light up. Press the small connection button on the underside of the mouse to sync the device.
5. Turn the mouse over and remove the battery compartment. Replace the batteries with fresh batteries. Most Dell wireless mice take AA batteries.
6. Verify that the mouse is positioned on a flat surface that is not reflective. You can place a standard piece of white printer paper under the mouse to prevent reflective surfaces from confusing the optics of the mouse.
7. Press the small connection button on the underside of the mouse to ensure the mouse is on and sending and receiving signals from the USB receiver or Bluetooth. If you've reset the receiver, computer or Bluetooth connection, you may need to push this button once more to sync the device.
How to Connect an HP Laserjet 6P With a USB
1. Open the computer's drive tray and insert the software CD, then shut the tray. Wait a moment for the CD to begin automatic playback.
2. Insert the USB plug on one end of the adapter cable into any USB port on the computer. The three-pronged arrow molded on one side of the plug should face upward.
3. Click the on-screen buttons on the computer monitor to install the software.
4. Connect the parallel plug to the matching port on the rear of the Laserjet 6P when prompted by the software installation screen.
5. Finish the installation by clicking the buttons when prompted, then restart the PC.
2. Insert the USB plug on one end of the adapter cable into any USB port on the computer. The three-pronged arrow molded on one side of the plug should face upward.
3. Click the on-screen buttons on the computer monitor to install the software.
4. Connect the parallel plug to the matching port on the rear of the Laserjet 6P when prompted by the software installation screen.
5. Finish the installation by clicking the buttons when prompted, then restart the PC.
How to Adjust Settings in Adobe Photoshop (7 Steps)
1. Select 'New' from the 'File' menu after you have opened Photoshop to open up the 'New' dialog box.
2. Type the name of your new document in the 'Name' text box.
3. Choose a preset document option from the 'Preset' drop-down box or leave it at the 'Custom' setting so you can create your own document settings.
4. Change the width and height of your document using the 'Width' and 'Height' text boxes. You can use the default measurement of inches or you can change it to pixels, cm, mm, points, picas or columns. As you change your width and height, notice that over to the right it will tell you what your image size will be given those settings.
5. Type in a resolution amount in the 'Resolution' box. The higher the dpi (pixels per inch) the greater the print quality. You can also change the resolution so it is measured in pixels/cm if you prefer.
6. Select a 'Color Mode' option from the drop-down box. Choose from the options of Bitmap, Grayscale, RGB Color, CMYK Color or Lab Color.
7. Choose a 'Background Contents' option, choosing from White, Background Color or Transparent and click OK.
2. Type the name of your new document in the 'Name' text box.
3. Choose a preset document option from the 'Preset' drop-down box or leave it at the 'Custom' setting so you can create your own document settings.
4. Change the width and height of your document using the 'Width' and 'Height' text boxes. You can use the default measurement of inches or you can change it to pixels, cm, mm, points, picas or columns. As you change your width and height, notice that over to the right it will tell you what your image size will be given those settings.
5. Type in a resolution amount in the 'Resolution' box. The higher the dpi (pixels per inch) the greater the print quality. You can also change the resolution so it is measured in pixels/cm if you prefer.
6. Select a 'Color Mode' option from the drop-down box. Choose from the options of Bitmap, Grayscale, RGB Color, CMYK Color or Lab Color.
7. Choose a 'Background Contents' option, choosing from White, Background Color or Transparent and click OK.
How to Add a Date Stamp on a Printer (11 Steps)
1. Press the 'menu' button on the HP printer's interface. Use the down arrow key to navigate to the 'Preferences' option in the menu screen.
2. Press 'OK' and use the down arrow key to navigate down to the 'Add Date/Time' menu entry. Press 'OK' again.
3. Scroll to the 'Date/time' option to include both the date and time in the stamp. Scroll to 'Date only' to only display the date, or select 'Off' to turn off the date stamp option.
4. Choose 'OK' to select the highlighted option.
Lexmark
1. Press the 'Copy' button on the Lexmark printer's menu panel. Tap the down arrow key on the menu panel until you reach the 'Options' entry.
2. Press the 'check mark' confirm button to confirm your choice. Scroll down to the 'Time Stamp' entry.
3. Press the right arrow key to choose 'On' or press the right arrow key again to choose 'Off.'
Epson
1. Press the 'Cancel' button twice on the Epson printer's front panel to return to the main menu screen. Press the down arrow icon twice to highlight the 'More Options' entry.
2. Press the 'OK' button. Scroll down with the down arrow icon to the 'Date Stamp' entry. Press 'OK' to turn on the option.
3. Scroll to the date format you want to use, such as 'yyyy.mm.dd' or 'mm.dd.yyyy.' Press 'OK' to confirm the choice. Scroll down to 'Time Stamp' if you want to include the time as well.
4. Press 'OK.' Scroll to either '12 hour' or '24 hour' and press 'OK' to confirm the choice. Press 'Print' to save the changes.
2. Press 'OK' and use the down arrow key to navigate down to the 'Add Date/Time' menu entry. Press 'OK' again.
3. Scroll to the 'Date/time' option to include both the date and time in the stamp. Scroll to 'Date only' to only display the date, or select 'Off' to turn off the date stamp option.
4. Choose 'OK' to select the highlighted option.
Lexmark
1. Press the 'Copy' button on the Lexmark printer's menu panel. Tap the down arrow key on the menu panel until you reach the 'Options' entry.
2. Press the 'check mark' confirm button to confirm your choice. Scroll down to the 'Time Stamp' entry.
3. Press the right arrow key to choose 'On' or press the right arrow key again to choose 'Off.'
Epson
1. Press the 'Cancel' button twice on the Epson printer's front panel to return to the main menu screen. Press the down arrow icon twice to highlight the 'More Options' entry.
2. Press the 'OK' button. Scroll down with the down arrow icon to the 'Date Stamp' entry. Press 'OK' to turn on the option.
3. Scroll to the date format you want to use, such as 'yyyy.mm.dd' or 'mm.dd.yyyy.' Press 'OK' to confirm the choice. Scroll down to 'Time Stamp' if you want to include the time as well.
4. Press 'OK.' Scroll to either '12 hour' or '24 hour' and press 'OK' to confirm the choice. Press 'Print' to save the changes.
How to Export Printer Drivers on Mac OS 10
1. Connect the external hard drive or USB flash drive to your Mac computer.
2. Click on the 'Finder' icon at the far left end of the dock.
3. Highlight 'Macintosh HD' from the Devices list on the left side of the Finder window.
4. Double-click on the folder icon labeled 'Library.'
5. Double-click on the 'Printers' folder to see the printer drivers that are installed on your computer. For some manufacturers, like Canon and Epson, you see separate folders that contain all the drivers for that brand.
6. Hold down the 'Shift' key on your keyboard and click on each printer driver or driver folder that you want to export.
7. Drag the highlighted items to the icon for the external hard drive or USB flash drive in the Devices list. Release the mouse button to copy the printer driver data to the other drive.
2. Click on the 'Finder' icon at the far left end of the dock.
3. Highlight 'Macintosh HD' from the Devices list on the left side of the Finder window.
4. Double-click on the folder icon labeled 'Library.'
5. Double-click on the 'Printers' folder to see the printer drivers that are installed on your computer. For some manufacturers, like Canon and Epson, you see separate folders that contain all the drivers for that brand.
6. Hold down the 'Shift' key on your keyboard and click on each printer driver or driver folder that you want to export.
7. Drag the highlighted items to the icon for the external hard drive or USB flash drive in the Devices list. Release the mouse button to copy the printer driver data to the other drive.
Wednesday, March 25, 2015
How to Hook Up an Optical Cable to a Bose Companion 5
1. Dial the volume knob on the top of the Bose control pod to zero before hooking up the speaker system to any device.
2. Connect the USB cable supplied with the Bose Companion 5 from the output on the rear of the Bose sub-woofer, which is the largest of the three speaker components in this system, to the matching port on the 'USB to optical' audio adapter box.
3. Connect the optical cable from the port on the adapter box to a digital optical audio jack on the rear of your surround sound receiver, or other compatible device with an optical jack.
4. Plug in the DC power cord supplied with the audio adapter into the round socket on the adapter. Plug in the other end to a wall outlet.
2. Connect the USB cable supplied with the Bose Companion 5 from the output on the rear of the Bose sub-woofer, which is the largest of the three speaker components in this system, to the matching port on the 'USB to optical' audio adapter box.
3. Connect the optical cable from the port on the adapter box to a digital optical audio jack on the rear of your surround sound receiver, or other compatible device with an optical jack.
4. Plug in the DC power cord supplied with the audio adapter into the round socket on the adapter. Plug in the other end to a wall outlet.
Dell Laser Printer Cleaning
1. Run a self-cleaning cycle on your Dell printer. The commands you enter to run the cycle vary with your model, so consult your user's manual. The self-cleaning cycle will remove waste toner from the cartridge.
2. Put on your ventilator mask so you don't inhale toner particles. Put on rubber gloves, as well, so you don't stain your fingers with the toner.
3. Unplug the printer. Spread the sheet on the floor. Roll the printer over the sheet, or pick it up and set it down, if it is small enough. Wait two hours for the printer to cool down.
4. Open the door of the laser printer and pull the toner cartridge up and out of the printer. Set it down on the sheet. Stretch the sides of your toner cloth to 'activate' it. Toner cloths trap toner particles. Wipe down the outside of your cartridge with the cloth.
5. Turn on the toner vacuum. Insert the nozzle into the printer, but do not touch the nozzle to any of the internal components. The suction is very strong and may damage the components. Use the vacuum to suck up loose toner particles. Open all printer drawers and run the vacuum along all the outer surfaces.
6. Dip your cotton swap into the Isopropyl alcohol and run it along the exposed corona wires that run through your machine. Run the cotton swab along the corners where the vacuum couldn't suck up the particles.
7. Replace the cartridge and plug the machine back in. Dispose of the sheet and the toner cloth.
2. Put on your ventilator mask so you don't inhale toner particles. Put on rubber gloves, as well, so you don't stain your fingers with the toner.
3. Unplug the printer. Spread the sheet on the floor. Roll the printer over the sheet, or pick it up and set it down, if it is small enough. Wait two hours for the printer to cool down.
4. Open the door of the laser printer and pull the toner cartridge up and out of the printer. Set it down on the sheet. Stretch the sides of your toner cloth to 'activate' it. Toner cloths trap toner particles. Wipe down the outside of your cartridge with the cloth.
5. Turn on the toner vacuum. Insert the nozzle into the printer, but do not touch the nozzle to any of the internal components. The suction is very strong and may damage the components. Use the vacuum to suck up loose toner particles. Open all printer drawers and run the vacuum along all the outer surfaces.
6. Dip your cotton swap into the Isopropyl alcohol and run it along the exposed corona wires that run through your machine. Run the cotton swab along the corners where the vacuum couldn't suck up the particles.
7. Replace the cartridge and plug the machine back in. Dispose of the sheet and the toner cloth.
How to Install Software on Epson Printers (4 Steps)
1. Open a new Internet browser window. Download the printer software for Windows 7 or Mac OS X 10.6 from Epson's support website (or see links in Resources section below). Save the file to the computer's hard drive.
2. Double-click the Epson software file from the hard drive. Wait while an 'installation disk image' is created on the computer.
3. Double-click the disk image to open it.
4. Double-click the installer icon. Follow the instructions until a message appears on the screen indicating the Epson printer software installation is complete.
2. Double-click the Epson software file from the hard drive. Wait while an 'installation disk image' is created on the computer.
3. Double-click the disk image to open it.
4. Double-click the installer icon. Follow the instructions until a message appears on the screen indicating the Epson printer software installation is complete.
How to Reset Replace the Drum in an HP Color Laserjet 2840
1. Engage the scanner bed release button located to the bottom right of the front control panel. Lift the scanner bed to expose the drum cover. Be sure to remove any paper media from the top feeder tray before lifting the scanner bed.
2. Lift the drum cover, located directly underneath the scanner bed.
3. Examine the front inside portion of the machine and locate the drum handle. Rotate the drum so the drum handle extends towards the top of the machine.
4. Lift the imaging drum from the machine, using the handle.
5. Unpack the replacement drum. Set and hold the replacement drum on a steady work surface and remove the small side-mounted orange rings. Unscrew the shipping spacers installed on both ends of the drum.
6. Lift the orange-colored protective cover plate from the drum. Avoid touching the drum roller when removing the cover plate.
7. Insert the new drum into the machine, noting the alignment arrows featured on the left side of the machine's drum cradle and the left side of the replacement drum.
8. Tilt the replacement drum towards the front of the machine to lock the component in place. Close the drum cover and lower the scanner bed.
9. Turn on the machine and allow the new drum to initialize. After installing the new drum, the machine will automatically reset the drum counter.
2. Lift the drum cover, located directly underneath the scanner bed.
3. Examine the front inside portion of the machine and locate the drum handle. Rotate the drum so the drum handle extends towards the top of the machine.
4. Lift the imaging drum from the machine, using the handle.
5. Unpack the replacement drum. Set and hold the replacement drum on a steady work surface and remove the small side-mounted orange rings. Unscrew the shipping spacers installed on both ends of the drum.
6. Lift the orange-colored protective cover plate from the drum. Avoid touching the drum roller when removing the cover plate.
7. Insert the new drum into the machine, noting the alignment arrows featured on the left side of the machine's drum cradle and the left side of the replacement drum.
8. Tilt the replacement drum towards the front of the machine to lock the component in place. Close the drum cover and lower the scanner bed.
9. Turn on the machine and allow the new drum to initialize. After installing the new drum, the machine will automatically reset the drum counter.
How to Print Oval Pictures
1. Insert high-gloss photo paper into the paper tray. Connect the printer to the laptop and turn it on.
2. Wait for Windows to load, then go to 'Start' and 'Control Panel.'
3. Double-click the 'Printers' folder. Right-click on the printer icon to select 'Printing Preferences.'
4. Select the 'Paper/Quality' tab and set print quality to 'Maximum dpi.'
5. Let photo ink dry for 12 hours, then cut out the oval picture.
2. Wait for Windows to load, then go to 'Start' and 'Control Panel.'
3. Double-click the 'Printers' folder. Right-click on the printer icon to select 'Printing Preferences.'
4. Select the 'Paper/Quality' tab and set print quality to 'Maximum dpi.'
5. Let photo ink dry for 12 hours, then cut out the oval picture.
How to Recycle Canon Ink Cartridges
1. Log on to Canon's website at canon.com and browse to the 'Environmental Programs' link on the left side bar menu. Then click 'Environment.' You will be taken to the 'Canon Cartridge Return Program' Web page.
2. Register at the site if you have not already done so. Click 'Register' and then give your personal information including name, address and email, along with your contact information. Then log in to the site.
3. Look under the printer or along the side for the product's serial number. You must have this to participate in the program.
4. Enter the appropriate information into the website after you log in. This includes the printer serial number and your address. Choose the mail service you wish to use (UPS or US Mail). Then click 'Finished' when you are done. A label will be generated for you by the website. Print this label.
5. Package your inks in an appropriately sized box. Attach the label and send it to Canon. The address will be printed on your label.
2. Register at the site if you have not already done so. Click 'Register' and then give your personal information including name, address and email, along with your contact information. Then log in to the site.
3. Look under the printer or along the side for the product's serial number. You must have this to participate in the program.
4. Enter the appropriate information into the website after you log in. This includes the printer serial number and your address. Choose the mail service you wish to use (UPS or US Mail). Then click 'Finished' when you are done. A label will be generated for you by the website. Print this label.
5. Package your inks in an appropriately sized box. Attach the label and send it to Canon. The address will be printed on your label.
How to Reset an Epson R285
1. Turn off the printer by pressing the power button. Check to make sure that the print head is in the default position, to the far right of the device and locked in place.
2. Hold down the paper feed button. Turn on the printer by pressing the power button.
3. Release the paper feed button as the paper feed light starts to flash. Immediately hold down the ink-drops button for 15 seconds.
4. Wait for the printer to complete its test run. Turn off the printer and then turn it back on once more.
2. Hold down the paper feed button. Turn on the printer by pressing the power button.
3. Release the paper feed button as the paper feed light starts to flash. Immediately hold down the ink-drops button for 15 seconds.
4. Wait for the printer to complete its test run. Turn off the printer and then turn it back on once more.
How to Reset an Epson SX
1. Download AdjProg.exe to your desktop.
2. Click on AdjProg.exe to load the software.
3. Click the 'Accept' and 'Select' buttons on the next two windows that appear. A window will pop up and ask you what printer model you have.
4. Select 'Epson SX-105' and click the 'OK' button.
5. Click the button labeled 'Particular adjustment mode.'
6. Click the button labeled 'Waste ink pad counter.'
7. Click the 'OK' button.
8. Click on the 'Initialization' button. The program will tell you to turn off your printer.
9. Turn off your printer.
10. Turn on your printer after it has fully powered down.
11. Click the 'Finish' button on the AdjProg.exe program to exit. You have now reset your Epson SX-105.
2. Click on AdjProg.exe to load the software.
3. Click the 'Accept' and 'Select' buttons on the next two windows that appear. A window will pop up and ask you what printer model you have.
4. Select 'Epson SX-105' and click the 'OK' button.
5. Click the button labeled 'Particular adjustment mode.'
6. Click the button labeled 'Waste ink pad counter.'
7. Click the 'OK' button.
8. Click on the 'Initialization' button. The program will tell you to turn off your printer.
9. Turn off your printer.
10. Turn on your printer after it has fully powered down.
11. Click the 'Finish' button on the AdjProg.exe program to exit. You have now reset your Epson SX-105.
How to Use a HP Photosmart Printer
1. Unpack your printer and assemble your printer supplies. You need ink cartridges labeled HP 02—which are already included in the box--and you should also invest in high-quality photo paper.
2. Plug in the printer. After five minutes, turn it on. Select the language from the printer screen and confirm your selection. Select also the proper country code and once again confirm your selection.
3. Connect the printer to your computer with the USB cable.
4. Install the ink cartridges by opening the printer top cover and simply sliding them into the labeled places. Close the top cover. Insert the photo paper into the paper tray.
5. Turn on your computer and insert the CD that was also in the printer box. Click on the install icon and the installation of the printer software will begin. Follow the prompts until the computer signals that the installation process is completed.
6. Log on to the Internet and double check on the HP website that you have the latest driver installed for your Photosmart printer. Assuming that you are good to go, it is now time to print some photos.
Print Photos from a Memory Card
1. Remove your digital camera’s memory card and insert it into the printer’s memory card slot. You will hear a little click when it is all the way in, and the memory card light will begin flashing.
2. Confirm that you want to save the photos that are on the memory card. The printer has its own memory, and you can save them directly to the printer hard drive.
3. Choose the view option and then the print option. You are now prompted to select the photo size. It is up to you to select the regular 4”-x-6” or any other size. Depending on your preference and the photo paper you purchased, you pick the paper size next.
4. Decide on the photos you want to print out. With the help of the arrow keys, you may bypass any pictures that you do not wish to print at this time and only highlight the photos you wish to print now.
5. Select the print option when you have finished the process and identified all the photos you are going to print.
2. Plug in the printer. After five minutes, turn it on. Select the language from the printer screen and confirm your selection. Select also the proper country code and once again confirm your selection.
3. Connect the printer to your computer with the USB cable.
4. Install the ink cartridges by opening the printer top cover and simply sliding them into the labeled places. Close the top cover. Insert the photo paper into the paper tray.
5. Turn on your computer and insert the CD that was also in the printer box. Click on the install icon and the installation of the printer software will begin. Follow the prompts until the computer signals that the installation process is completed.
6. Log on to the Internet and double check on the HP website that you have the latest driver installed for your Photosmart printer. Assuming that you are good to go, it is now time to print some photos.
Print Photos from a Memory Card
1. Remove your digital camera’s memory card and insert it into the printer’s memory card slot. You will hear a little click when it is all the way in, and the memory card light will begin flashing.
2. Confirm that you want to save the photos that are on the memory card. The printer has its own memory, and you can save them directly to the printer hard drive.
3. Choose the view option and then the print option. You are now prompted to select the photo size. It is up to you to select the regular 4”-x-6” or any other size. Depending on your preference and the photo paper you purchased, you pick the paper size next.
4. Decide on the photos you want to print out. With the help of the arrow keys, you may bypass any pictures that you do not wish to print at this time and only highlight the photos you wish to print now.
5. Select the print option when you have finished the process and identified all the photos you are going to print.
How to Unclog a Printer Head (12 Steps)
1.
Fotolia.com'>
Inkjet printer cartridges
Open the printer and remove ink cartridges.
2. Turn off and unplug the printer.
3. Remove the printer head from the printer assembly if it is designed for this to be easily done. If this is not the case, move the printer head to the center of the printing track.
Clean Printer Head
1. If you removed the printer head, let it soak in a bowl of warm water overnight before cleaning it. This will help loosen the dried ink. If you could not remove the printer head, move the head along the print track to the center of the printer and place a towel or rag underneath it.
2. Mix a solution of one part distilled water with one part rubbing alcohol.
3.
Fotolia.com'>
Syringe without needle tip
Build a printer head cleaner by placing a short length of rubber tubing over the tip of a syringe.
4. Fill the syringe with the distilled water/alcohol solution.
5. The inkjet printer head will have four to eight ink nozzles. Place the end of the rubber tubing over the top of the inkjet nozzle and gently press the cleaning solution through until it drips out the other side onto the towel or rag. Repeat this process with the other nozzles.
Replace and Test
1. Allow the printer head to dry.
2. If you removed the printer head from the printer, replace it.
3. Install ink cartridges in the printer head.
4. Run the printer's test print process to ensure that the print head has been unclogged.
Fotolia.com'>
Inkjet printer cartridges
Open the printer and remove ink cartridges.
2. Turn off and unplug the printer.
3. Remove the printer head from the printer assembly if it is designed for this to be easily done. If this is not the case, move the printer head to the center of the printing track.
Clean Printer Head
1. If you removed the printer head, let it soak in a bowl of warm water overnight before cleaning it. This will help loosen the dried ink. If you could not remove the printer head, move the head along the print track to the center of the printer and place a towel or rag underneath it.
2. Mix a solution of one part distilled water with one part rubbing alcohol.
3.
Fotolia.com'>
Syringe without needle tip
Build a printer head cleaner by placing a short length of rubber tubing over the tip of a syringe.
4. Fill the syringe with the distilled water/alcohol solution.
5. The inkjet printer head will have four to eight ink nozzles. Place the end of the rubber tubing over the top of the inkjet nozzle and gently press the cleaning solution through until it drips out the other side onto the towel or rag. Repeat this process with the other nozzles.
Replace and Test
1. Allow the printer head to dry.
2. If you removed the printer head from the printer, replace it.
3. Install ink cartridges in the printer head.
4. Run the printer's test print process to ensure that the print head has been unclogged.
How to Clean a Samsung Laser Printer (5 Steps)
1. Unplug your Samsung printer from the computer and from the electrical outlet.
2. Take all of the paper out of the paper tray and wipe the tray clean of dust with a clean cloth. You can put some cold water on the cloth to help you grab the dirt.
3. Open the printer door and clean the inside thoroughly. Use laser printer cleaning cloths to get rid of loose toner and other dirt inside the printer.
4. Douse a cotton swab in acetone and rub the feed rollers until they are clean. The feed rollers are where the printed pages are fed out of the printer.
5. Rub the entire exterior of the printer with a damp cloth. This will remove any dust or toner that may have settled on the cover.
2. Take all of the paper out of the paper tray and wipe the tray clean of dust with a clean cloth. You can put some cold water on the cloth to help you grab the dirt.
3. Open the printer door and clean the inside thoroughly. Use laser printer cleaning cloths to get rid of loose toner and other dirt inside the printer.
4. Douse a cotton swab in acetone and rub the feed rollers until they are clean. The feed rollers are where the printed pages are fed out of the printer.
5. Rub the entire exterior of the printer with a damp cloth. This will remove any dust or toner that may have settled on the cover.
How to Focus Blurry Pictures
1. Open your image-editing software and load the photo you wish to work on.
2. Click 'Filter,' then 'Sharpen' from the program's menu. You will likely see minor improvements to the image. Run this filter two or three times as needed but be careful not to overdo it. Extensive use of the sharpen filter can make the colors appear exaggerated and the image pixelated.
3. Click 'Filter,' 'Sharpen,' then 'Smart Sharpen' for images where the normal sharpen tool is ineffective. The smart sharpen tool helps to eliminate various problems like motion blur, Gaussian blur and general lens blur. Select the problem that plagues your photo the most from the dialogue box's drop-down menu and make sure the 'preview' box is checked.
4. Play with the 'amount' slider and the 'pixels' slider to see various results. When you've found the ideal combination for your image, click 'OK' and save your file.
2. Click 'Filter,' then 'Sharpen' from the program's menu. You will likely see minor improvements to the image. Run this filter two or three times as needed but be careful not to overdo it. Extensive use of the sharpen filter can make the colors appear exaggerated and the image pixelated.
3. Click 'Filter,' 'Sharpen,' then 'Smart Sharpen' for images where the normal sharpen tool is ineffective. The smart sharpen tool helps to eliminate various problems like motion blur, Gaussian blur and general lens blur. Select the problem that plagues your photo the most from the dialogue box's drop-down menu and make sure the 'preview' box is checked.
4. Play with the 'amount' slider and the 'pixels' slider to see various results. When you've found the ideal combination for your image, click 'OK' and save your file.
Instructions for Xerox Iron
1. Turn on your printer and load a single sheet of Xerox iron-on transfer paper into the paper tray. Make sure the paper is positioned so that the image will be printed on the shiny coated side.
2. Click the 'Start' button in the task bar and select 'All Programs.' Open the 'Accessories' folder and double-click 'Paint.'
3. Click 'File' in the toolbar and select 'Open.' Press the 'Browse' button in the dialog box and highlight the image you want to use as a transfer. Click 'Open' to confirm your selection.
4. Click 'File' in the toolbar and select 'Print.' Highlight your printer in the 'Select Printer' field.
5. Click the 'Preferences' button and select the 'Page Layout' tab. Check the box next to 'Mirror Image' and press 'OK' to confirm. If your printer does not include this option you will need to manually flip the image by pressing the 'Rotate' button in the toolbar and selecting 'Flip Horizontal.'
6. Click the 'Print' button. Carefully cut away the excess transfer paper leaving space of half a centimeter around the image.
7. Plug the iron into a wall socket and set to the highest temperature. Prepare a hard, flat surface using a folded pillowcase.
8. Place the fabric on the folded pillowcase. Use the iron to remove any creases.
9. Position the transfer face-down on the fabric. Press the iron for 8 to 10 seconds, making sure to apply even pressure across the whole surface of the transfer. Heavier material may require up to 30 seconds.
10. Peel the transfer paper away.
2. Click the 'Start' button in the task bar and select 'All Programs.' Open the 'Accessories' folder and double-click 'Paint.'
3. Click 'File' in the toolbar and select 'Open.' Press the 'Browse' button in the dialog box and highlight the image you want to use as a transfer. Click 'Open' to confirm your selection.
4. Click 'File' in the toolbar and select 'Print.' Highlight your printer in the 'Select Printer' field.
5. Click the 'Preferences' button and select the 'Page Layout' tab. Check the box next to 'Mirror Image' and press 'OK' to confirm. If your printer does not include this option you will need to manually flip the image by pressing the 'Rotate' button in the toolbar and selecting 'Flip Horizontal.'
6. Click the 'Print' button. Carefully cut away the excess transfer paper leaving space of half a centimeter around the image.
7. Plug the iron into a wall socket and set to the highest temperature. Prepare a hard, flat surface using a folded pillowcase.
8. Place the fabric on the folded pillowcase. Use the iron to remove any creases.
9. Position the transfer face-down on the fabric. Press the iron for 8 to 10 seconds, making sure to apply even pressure across the whole surface of the transfer. Heavier material may require up to 30 seconds.
10. Peel the transfer paper away.
How to Automatically Clean an Epson Inkjet Cartridge
1. Turn the printer on.
2. Open the 'Control Panel' in Windows Explorer or in your computer's 'Start' menu. Click on the 'Printers/Faxes' icon and click on the icon displaying your Epson printer.
3. Select the 'Cleaning,' 'Maintenance,' 'Utilities' or 'Options' tab, and then select 'Align Print Cartridges.' Click OK to initiate the alignment.
4. Clean the cartridges by clicking an option called 'Clean the Print Cartridge' under the same tab. Follow the instructions on the screen.
5. Run a test page to make sure the quality is improved.
6. If your results are not satisfactory, repeat the cleaning process again. Make sure your color settings are correct.
2. Open the 'Control Panel' in Windows Explorer or in your computer's 'Start' menu. Click on the 'Printers/Faxes' icon and click on the icon displaying your Epson printer.
3. Select the 'Cleaning,' 'Maintenance,' 'Utilities' or 'Options' tab, and then select 'Align Print Cartridges.' Click OK to initiate the alignment.
4. Clean the cartridges by clicking an option called 'Clean the Print Cartridge' under the same tab. Follow the instructions on the screen.
5. Run a test page to make sure the quality is improved.
6. If your results are not satisfactory, repeat the cleaning process again. Make sure your color settings are correct.
How to Share a Printer Through a Linksys Wireless Router
1. Set up the Linksys wireless router and create a wireless network. Password-protect your wireless network to avoid others from gaining access to the connection or printer.
2. Connect the printer to the wireless router using the available USB port on the router. Not all wireless routers come equipped with a USB port.
3. Search for the new printer connection on your computer to add it as one of the available options. From the 'Control Panel,' click 'Devices and Printers,' then 'Add a Printer.' Locate the printer you connected to the wireless router and click 'OK' to add it to your available printer options.
Wireless Sharing
1. Set up the Linksys wireless router and create a wireless network. Password-protect your wireless network to avoid others from gaining access to the connection or printer.
2. Connect and install the printer on one of the computers connected to the wireless network.
3. Open the computer's sharing options by clicking 'Start -> Control Panel -> Network and Sharing -> Sharing Options.' Enable 'File and Printer Sharing.'
4. Click 'Start -> Control Panel -> Printers and Faxes.' Locate the icon for the printer you want to share through the wireless router and right click on it. Select 'Share This Printer' and click 'OK.' Depending on your operating system, you may have to right-click, select 'Printer Properties,' then the 'Sharing' tab click 'Share This Printer.'
2. Connect the printer to the wireless router using the available USB port on the router. Not all wireless routers come equipped with a USB port.
3. Search for the new printer connection on your computer to add it as one of the available options. From the 'Control Panel,' click 'Devices and Printers,' then 'Add a Printer.' Locate the printer you connected to the wireless router and click 'OK' to add it to your available printer options.
Wireless Sharing
1. Set up the Linksys wireless router and create a wireless network. Password-protect your wireless network to avoid others from gaining access to the connection or printer.
2. Connect and install the printer on one of the computers connected to the wireless network.
3. Open the computer's sharing options by clicking 'Start -> Control Panel -> Network and Sharing -> Sharing Options.' Enable 'File and Printer Sharing.'
4. Click 'Start -> Control Panel -> Printers and Faxes.' Locate the icon for the printer you want to share through the wireless router and right click on it. Select 'Share This Printer' and click 'OK.' Depending on your operating system, you may have to right-click, select 'Printer Properties,' then the 'Sharing' tab click 'Share This Printer.'
Subscribe to:
Posts (Atom)