How to Stop the Test Print for an HP PSC 1500 Printer

1. Ensure the printer has clean paper in it. Turn the printer off, then turn it back on again. Allow the printer to print the alignment test page.
2. Lift the lid on the scanner and align the top edge of the alignment page face down on the lower-right corner of the scanner glass. Close the scanner lid.
3. Press the 'Start' button on the left-hand side of the PSC 1500. The power button light will start blinking to indicate the alignment is in process. When the light stops blinking, the alignment process is complete and you can remove the test page from the scanner glass.
4. Turn the PSC 1500 off and then back on again. The unit should no longer produce test pages when you turn it on or print to it.