How to Troubleshoot a Canon Print Head Error

1. Check the 'Alarm/Power' light and count the number of times it's flashing to determine if there is a print head error.
2. Open the printer cover and allow the printer cartridges to center. Remove all the ink tanks. Unclip the print head with the blue lever and re-seat it. Snap it in, put the tanks back in, and close the lid. Turn the printer off and then on again.
3. Run a print test to verify the print quality is acceptable and that the ink is ejecting satisfactorily from the nozzles. Press and hold the 'Resume/Cancel' button. The power lamp will flash twice. Release the button and the test page will print. Take a look at the output.
4. Perform deep cleaning if the output in the test is unacceptable. Enter the printer properties dialog box in the 'Printers' folder on the computer and choose the 'Maintenance' tab from the printer properties dialog box. Choose 'Deep Cleaning' and then 'Execute.' Perform deep cleaning a couple of times if necessary.
5. Replace the ink cartridge if you continue to get unsatisfactory results for a particular color ink. Open the lid, allow the print head to center. Remove the ink cartridge. Insert a new one into the printer. Close the cover and allow the printer to reset itself.